Triangle VSC (!) Lights on no pending codes

Discussion in 'Gen 2 Prius Technical Discussion' started by Banksy, Apr 13, 2020.

Tags:
Page 3 of 3
  1. Banksy

    Banksy Active Member

    Joined:
    Feb 7, 2020
    415
    132
    0
    Location:
    Lancaster Pennsylvania
    Vehicle:
    2021 Prius Prime
    Model:
    LE
    Sorry for the multiple posts.

    I thought I was responding to a personal message rather than this thread.

    I used butt splicers (great name) that I got at a auto parts store down the street

    Which really pissed me off because my local hardware store had the same ones for like three dollars less.

    Anyways I used dual end butt splicers (I can't type that with a straight face.) And then wrapped it all in electrical tape because why not.

    Ran techstream and boom fan works perfectly.

    SHAZAM

    Thanks for all the help I really appreciate it from all of those who took the time to help me.
     
    #41 Banksy, Apr 15, 2020
  2. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    25,665
    16,765
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    So called, it seems, because the two wire ends butt up against each other, rather than overlapping.
     
    #42 ChapmanF, Apr 15, 2020
  3. dolj

    dolj Senior Member

    Joined:
    May 14, 2012
    8,021
    4,061
    0
    Location:
    Wellington, New Zealand
    Vehicle:
    2007 Prius
    Model:
    N/A
    The preference is just to use the "Upload a File" button and add your image directly to the post. Inevitably, links to 3rd party sites always end up breaking.
    Why not? Because over time and depending on environmental conditions insulation tape will end up an icky gooey mess. Secondly, if you do not have any exposed bare copper wire, then no need to. If you do have exposed wire, you've done it wrong.

    If you want to waterproof it, use heat shrink.
     
    #43 dolj, Apr 16, 2020
  4. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    25,665
    16,765
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    In fairness, to use heatshrink, you have to think of it before making the splice.

    Dipping the splice in Plasti-Dip can also protect it. (They have a clear version that lets you see how the splice is holding up.)

    Rescue Tape works also, and doesn't do the sticky gooey thing.
     
    #44 ChapmanF, Apr 16, 2020
  5. Banksy

    Banksy Active Member

    Joined:
    Feb 7, 2020
    415
    132
    0
    Location:
    Lancaster Pennsylvania
    Vehicle:
    2021 Prius Prime
    Model:
    LE
    So should I take the tape off?

    What should I do here?

    Only did that because it seemed a good way to prevent moisture and such.

    As for exposed wire I think one of the spliced wires had a tiny bit exposed

    Can't really remember
     
    #45 Banksy, Apr 16, 2020
(You must log in or sign up to post here.)
Page 3 of 3