Projector Fog lights (BOLT ON) finally!

Thanks so much!

 

Thanks

 

Did you get a set?

 

Since I'm new it's not allowing to reply. I'm not sure what to do now. He sent me the price but I can't send his email for PayPal.

 

Whoa, sorry still getting used to the site. xliderider please PM me your email for payment.

 

I'm not the one selling them lol.

 

Sorry xliderider... again I'm new

 

I entered the idea of light bars, but you have to cover them up when you get to the highway. Here's a short clip of the high beam.

 

I got these bad boys installed. The lens is really thick vs other after market lens. I loved them. Worth every penny. Check them out. Make sure you point the circle down not up. The projector is very far out. I used LED bulb 3000K. Don't need a ballast to power them. Instant on vs HID.

 

I'm using just a standard Sylvania H11 bulb in these projectors and they fit great as expected. When I ordered the pigtails, I bought these off ebay: 2 Piece H11 H8 H9 Wiring Harness Socket Wire Connector Plug Power Cable Cord | eBay

I didn't pay close attention to the picture because I thought it was just a stock picture and they would send me the correct connector, but instead this came:


The black connector on top is the OEM Prius connector for the H11 low beam. The lower one with the yellow gasket is what came from ebay.

Looking over the auction listing again, I think you're supposed to use this connector to plug into an existing H11 male connector, and then the side with the yellow gasket plugs into what looks like a 9006 bulb.

Did I mess up?

 

If I have the H11 connector, why do u need the harness? Did I miss something?

VS980 4G ?

 

I plugged the H11 bulbs in my projectors directly to the factory wiring harness. The one you have pictured isn't an H11 connector, contact the eBay seller and send them that picture. They sent you the wrong one. Get a refund, you don't need them.

 

The spacing between the connectors in the ones you received are too far apart, H11 connectors should look like these:

H11 H8 Wiring Harness Socket Wire Connector Plug | eBay

 

I'm guessing he is trying to wire up the projector foglights without using a standard foglight wiring harness, the H11 connector pictured is of the lowbeam H11 connector on the headlight.

 

Yep. I want to make my own harness. The black connector in the pix is the low beam.

 

I got the same projector fog from Cheizy, I had installed HID kit and able to plug in the H11 connector in the HID ballast WHICH is 9006 type, I just adjust/bend the pins in the ballast, it fit right it.

 

Why not just get the terminals u crimp onto it harness

Common Connections - Accessories

VS980 4G ?

 

OP, I love your headlight color. What did you done to the headlight? Just simply changing the low beam bulbs?
Are they 5000k or 6000k bulb?
Thanks!