Prius CAN Monitor and data logger for Windows PC

google is my friend so already have seen attila's site
thx anyway

really exited for next weekend when i hope i got the adapter!

 

Oh, that makes sense now. Was on the phone while typing, must have become confused

Actually there is a comma, not a decimal, in that figure. $38,000 Cdn is about 25000 Euros

Only an independantly wealthy person, or a business, can afford one, let alone four of them

 

i have the adapter ( elmscan 5 usb )
got the usb version so its faster!

already connected it and can communicate is really simple and easy
but thats the standers things like ice rpm's and temp

now i have to look into the prius specific info.

 

whit pcmscan that i am using i can only send hex codes or bitmasks ( whatever that means )

 

your correct

i got it working with pcmscan
but when i use a different program special for the elmscan i can set the speed to 500000 bps

because the usb version of the elkmscan can get a max off 500kpbs

only problem is that pcmscan gives me a range of pid's ( sensor readings )
that only are the industrial standards for engine rpm and temp. etc etc.

only its not showing the prius special HV battery voltage info .......



already used windows hyper terminal and got a successful connection but then i got HEX codes that i can not translate to something useful

 

when i go into terminal mode and send something to the canbus
then i get the following

send : 03CB ( battery )
and get : 7F 03 12

i translate this to decimals and get
7f = 127
03 = 11
12 = 18

send : 3B ( em current)
and get : 7F 3B 12

i translate this to decimals and get
7f = 127
3B = 59
12 = 18

 

Hi All,
Please somebody contact me off list, I would like to get a copy of the PC logging software. Ken?
thanks so much in advance!
Steve.

 

Something isn't right, the passive mode is probably buffer overrun. I'm leaving tomorrow on a business trip, will look into this when I get back next week

 

like to get the software to
maybe someone is in contact with the TIM guy
that made it elmscan workable!

 

Sometimes reading threads I get confused. :frusty:

What is the bottom line here? What and where is the best solution for the best price. I'm not looking to reinvent the wheel, but would like to improve what is already invented.

What ever happened to the elm solution. Reason I ask is they are cheap on ebay. Any ever use the ones from ebay and the software they come with?

Also, do any of these solutions let you register TPMS sensors? or is all this just strictly read-only?

If I can figure out what to get, I'll write up a full tutorial on what to do for others.

steve

 

i got the software from ken today
and started the program
can readout gas pedal state but thats about it right now
going to have a look wy i am not seeing brakepadel and battery voltage en soc because thats what for me its all about!!

 

Ken, my direct email is
steve at autobeyours.com
You know to substitute @ for at
I have asked my provider to allow email from you..we shall see.

Apologies to everyone for public post about software,,I promise to make it up to you with a good contribution to the cause.

 

i hope it also
the elmscan is also the device i am using

i am going to try this tomorrow ( when i have the time ) and send to the elmscan

for gas gauge, coolant & other misc status (LOW speed)
ATCF500
ATCMF00
ATCMF00

traction battery status & MPH
ATCF300
ATCMF00
ATCMF00
ATCMF00"


traction battery current (high speed)
ATCF03B
ATCMFFF
ATCMFFF
ATCMFFF

filter for accelerator pedal (high speed)
ATCF244
ATCMFFF
ATCMFFF
ATCMFFF

filter for brake pedal (high speed)
ATCF030
ATCMFFF
ATCMFFF
ATCMFFF