1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Cloudy/Blurry AC screen?

Discussion in 'Gen 3 Prius Main Forum' started by Morgank6, Jul 7, 2009.

  1. Randall Rash

    Randall Rash Member

    Joined:
    Sep 13, 2006
    149
    25
    0
    Location:
    Rockwall, TX
    Vehicle:
    2010 Prius
    Model:
    IV
    Well my pics were all blurry cr@pola so I have none to share, but I am happy withthe results after 4 applications of Novus 2 and 2 applications of Novus 1.
     
    1 person likes this.
  2. BobbiB

    BobbiB Junior Member

    Joined:
    Dec 18, 2009
    4
    1
    0
    Location:
    Pennsylvania
    Vehicle:
    2010 Prius
    Model:
    IV
    Mine is blurry too. And in the sunlight it looks as if it was combed with a sharp fork. I've only had the car for 3 1/2 months. It came that way and I was too dumb to complain right away. It is a safety hazard when you are driving down the road and move your head to look at the screen.
     
  3. sciguy125

    sciguy125 Junior Member

    Joined:
    Jul 18, 2009
    90
    22
    0
    Location:
    CA
    Vehicle:
    2010 Prius
    Model:
    II
    Who's had the dealer take care of this issue?
     
  4. LRKingII

    LRKingII New Member

    Joined:
    May 31, 2009
    679
    132
    0
    Location:
    Idaho
    Vehicle:
    2010 Prius
    Model:
    III
    Me. :)
    Read the posts in this thread.
     
  5. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,482
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    T-SB-0387-09: A/C Control Display Difficult to Read

    Here's the TSB for the blurry A/C control display.
     

    Attached Files:

    6 people like this.
  6. bobmcmahan

    bobmcmahan New Member

    Joined:
    Aug 18, 2009
    3
    0
    0
    Location:
    Ojai
    Vehicle:
    2010 Prius
    Model:
    IV
    My AC screen is green and chrystal clear. Weird. Probably a bad manufacturing lot. I would go to the dealer and compare yours with other another new Prius on the dealers lot.
     
  7. Susan4ET

    Susan4ET Member

    Joined:
    May 9, 2007
    429
    53
    0
    Location:
    Central Oregon
    Vehicle:
    2015 Prius
    Model:
    Three
    Okay, so I can look at my AC screen and see what looks like a little blur effect. Readable but blurred edges. But my VIN is above the BEFORE VINs listed in the TSB. Is there still an ongoing issue about this? I'm not certain when or if this might ever become a concern but if something isn't right with my car then now is the time to address it. I saw a couple of blurred examples in earlier posts and mine isn't far from them but... How does this get resolved now?
     
  8. ctmurray

    ctmurray Member

    Joined:
    Nov 22, 2006
    121
    10
    0
    Vehicle:
    2010 Prius
    Model:
    IV
    As far as I can tell my serial number is lower than all those listed. Mine starts with 00 and then is less than 37997 which is listed as the first row in the table. But you could also just call Toyota and see what they say.
     
  9. pakitt

    pakitt Senior Member

    Joined:
    Aug 10, 2009
    2,173
    1,312
    0
    Location:
    Colorado
    Vehicle:
    2021 Prius Prime
    Model:
    Limited
    OK - I think my A/C screen is blurry (though readable) - is the TB above also valid in Germany? does any German reader of PC, or at least in EU, tell me if they had this done on their Priuses as well?
    Thanks.
     
  10. ctmurray

    ctmurray Member

    Joined:
    Nov 22, 2006
    121
    10
    0
    Vehicle:
    2010 Prius
    Model:
    IV
    I had to go in for the recall computer upgrade. I gave them a printout of the TB and they were surprised a customer had this information. But I was casual, I said they could decide if my car qualified. At this dealer you drive into the garage when you drop off your car, so it does not show the blurriness in full glory (I mentioned they should take it outside for the full effect). And the tech seemed to have never heard of this issue, though he took the time to read the TB. Anyway when I was done they said I qualified for the replacement and they would order the parts and get back to me. So I am pretty happy I did not have to fight for the replacement, and pretty happy with my dealer. I really like this dealership as their waiting room has work benches with power and free Wifi so I can do email and stuff while I wait. They also have good coffee and free doughnuts (though I passed on these). Anyway it took a while (1 hour) but I had plenty of work email to do.
     
  11. DetPrius

    DetPrius Active Member

    Joined:
    Apr 24, 2009
    545
    92
    0
    Location:
    Southeast Michigan
    Vehicle:
    2010 Prius
    Model:
    III
    I took the TSB in and showed them when I had my first service last fall, prior to all the recall and runaway Toyota talk. They told me the technician would have to look at it and only if he agreed it was a problem would they replace it. I told them I had not decided if I wanted it replace out of a concern they would either leave marks on the surrounding area or introduce a rattler from disassembly/assembly.

    I took the TSB in again when I went in for the brake recall and they didn't question it at all. They took my word that it needed to be replaced and ordered the parts. I went back a week later and they replaced it and washed the car in 30 minutes. No scratches or rattles or any evidence it was replaced and it is MUCH better than the original. It now looks just like the Radio/CD display above it. I am very happy with it and would do it again.
     
  12. ctmurray

    ctmurray Member

    Joined:
    Nov 22, 2006
    121
    10
    0
    Vehicle:
    2010 Prius
    Model:
    IV
    I had nearly the same experience. I stopped by for the brake recall and showed them the TSB provided by the PriusChat Forum. Initially they were a little defensive ("customers are not suppose to have these bulletins"). But after servicing the brakes they came out and said they were ordering the part and agreed the display was fuzzy.

    The part came in and I had this replaced on Friday. No mark or damage to the rest of the panel and a much clearer AC display.
     
  13. stream

    stream Senior Member

    Joined:
    May 12, 2008
    2,977
    452
    14
    Location:
    Long Island, NY
    Vehicle:
    2010 Prius
    Model:
    V
    I had the A/C display replaced today when I had the 10,000 mile service performed, along with the brake squeak issue (T-SB-0098-10). The display is so much clearer, particularly during the day while wearing sunglasses. I was on the fence whether to bother with it, and am so glad I did. Before it was pretty useless in bright sun conditions, but now looks like you'd expect it to.
     
  14. jorbock

    jorbock New Member

    Joined:
    Jul 17, 2009
    18
    6
    0
    Location:
    Longmont, CO
    Vehicle:
    2010 Prius
    Model:
    III
    The blurriness of the AC display has bothered me from the day I bought the car last July so I just had my A/C display replaced under warranty. I showed the dealer the TSB, which applied to my car's VIN, when I had the brake recall work performed. The service manager said he hadn't heard of this problem or the TSB, but asked to keep my copy of the TSB so they could look it up. After the brake reprogramming, he said they would order a new display which I had replaced about two weeks later. No problems with the replacement and the display is so much clearer.
     
  15. skolodkin@alum.mit.edu

    [email protected] StanleyK1

    Joined:
    Jun 25, 2009
    3
    1
    0
    Location:
    Longboat Key, FL
    Vehicle:
    2010 Prius
    Model:
    V
    The dealer just "changed" the display in accordance with the bulletin. I can notice no change in appearance. Still cloudy and hard to read. I wonder if anyone else has had the upgrade and what the results were. (I noticed that the part no. in the bulletin, old and new, is the same.
     
  16. DetPrius

    DetPrius Active Member

    Joined:
    Apr 24, 2009
    545
    92
    0
    Location:
    Southeast Michigan
    Vehicle:
    2010 Prius
    Model:
    III
    I had the cloudy/blurry screen and it changed and the difference was night and day. It sounds like you didn't have the problem to start with or you did and they did not really change it out. It's a bit difficult to capture in a photo but some in this thread I believe were successful at doing it. Mine is now as clear as the radio display above it.
     
  17. stream

    stream Senior Member

    Joined:
    May 12, 2008
    2,977
    452
    14
    Location:
    Long Island, NY
    Vehicle:
    2010 Prius
    Model:
    V
    See my post--2 above yours. ;)
     
  18. pakitt

    pakitt Senior Member

    Joined:
    Aug 10, 2009
    2,173
    1,312
    0
    Location:
    Colorado
    Vehicle:
    2021 Prius Prime
    Model:
    Limited
    I am sending the TSB to my dealer in Munich - he claims he does know about it (and indeed the TSB posted here is only for the US).
    I have no huge issue with the screen, but certainly the difference is visible. If it should be changed, I want it to be changed. Let's see if this "defect" is recognised/acknowledged by Toyota Germany at all...
     
  19. xs650

    xs650 Senior Member

    Joined:
    Jul 2, 2010
    4,539
    1,433
    9
    Location:
    Northern California
    Vehicle:
    2010 Prius
    Model:
    II

    My Gen 3 II which was built in May 2010, well after the cutoff date on the TSB is unreadable when the light is bright outside and the display in the shade. Not worth atrip to the dealer, but I will catch it at my first dealer visit.
     
  20. dragonslayer8228

    dragonslayer8228 Junior Member

    Joined:
    Jul 12, 2010
    9
    0
    10
    Location:
    Herndon VA
    Vehicle:
    2010 Prius
    Model:
    III
    Just a thought but if you're feeling really cheap you could always try toothpaste or creamy peanut butter as your abrasive. ;)