1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Car hasn’t started in a year. All lights on.

Discussion in 'Gen 2 Prius Technical Discussion' started by dirt657, Jan 7, 2019.

Page 2 of 2
  1. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    That reading should be taken when the battery has rested 10+ hours.

    But 12.4v would mean it's good
     
    #21 JC91006, Jan 7, 2019
  2. dirt657

    dirt657 Member

    Joined:
    Dec 1, 2018
    159
    42
    0
    Location:
    Arroyo Grande, CA
    Vehicle:
    2010 Prius
    Model:
    N/A
    Right. I heard the dude above say 1 hour. But I’ll do it again tomorrow
     
    #22 dirt657, Jan 8, 2019
  3. dirt657

    dirt657 Member

    Joined:
    Dec 1, 2018
    159
    42
    0
    Location:
    Arroyo Grande, CA
    Vehicle:
    2010 Prius
    Model:
    N/A
    4 days later, the 12v is fine. I have a driven it around some more. One of the ABS codes is gone. Lights that are on: Maintenance required, TPMS, CEL, VSC, ABS, and now the monitor is saying that it's 36 degrees outside when its really 60 degrees.
    Code are p0138 and C0205 which is O2 sensor 1 bank 2 high voltage and left front wheel speed sensor signal malfunction, respectively. I recharged the hybrid battery as well. Car runs like a scolded dog, I just want to make sure it isn't anything else before I go and get rid of those codes. I have thought about keeping this car. Even if I do and don't decide to sell it, I need to clear those lights before I go crazy!
     
    #23 dirt657, Jan 11, 2019
  4. Skibob

    Skibob Senior Member

    Joined:
    Sep 14, 2018
    2,912
    1,497
    0
    Location:
    Northern California
    Vehicle:
    2006 Prius
    Model:
    N/A
    Maintence required is a timed mileage light you can turn off yourself. Abs and others might be the wheel speed sensor.
     
    #24 Skibob, Jan 11, 2019
  5. dirt657

    dirt657 Member

    Joined:
    Dec 1, 2018
    159
    42
    0
    Location:
    Arroyo Grande, CA
    Vehicle:
    2010 Prius
    Model:
    N/A
    What would the VSC sensor be? And does anyone have a write up for the 02 sensor?
     
    #25 dirt657, Jan 11, 2019
  6. dolj

    dolj Senior Member

    Joined:
    May 14, 2012
    7,855
    3,967
    0
    Location:
    Wellington, New Zealand
    Vehicle:
    2007 Prius
    Model:
    N/A
    You have mentioned in this thread and others that you "read the codes and got only Pxxxx ..." codes. I'm thinking you are not seeing the codes from all the car's computers.

    Are you using Techstream to read the codes or something else?
     
    #26 dolj, Jan 14, 2019
  7. dirt657

    dirt657 Member

    Joined:
    Dec 1, 2018
    159
    42
    0
    Location:
    Arroyo Grande, CA
    Vehicle:
    2010 Prius
    Model:
    N/A
    I bought techstream. Needless to say, problem solved. Pretty insane what this technology can do.
     
    #27 dirt657, Jan 23, 2019
    Raytheeagle likes this.
  8. Raytheeagle

    Raytheeagle Senior Member

    Joined:
    Jul 1, 2016
    11,257
    15,491
    0
    Location:
    Bay Area, California
    Vehicle:
    2019 Prius Prime
    Model:
    Prime Plus
    So the solution to the problem was:whistle:?

    Always good to have the resolution shared for the next guy(y).
     
    #28 Raytheeagle, Jan 23, 2019
    Skibob likes this.
  9. dirt657

    dirt657 Member

    Joined:
    Dec 1, 2018
    159
    42
    0
    Location:
    Arroyo Grande, CA
    Vehicle:
    2010 Prius
    Model:
    N/A
    The lights were genuine. CEL is off after changing O2. Will be replacing the wheel speed sensor tomorrow I'll see if that shuts off the other 3. Then an oil change for the maintenance required light.
     
    #29 dirt657, Jan 24, 2019
    Raytheeagle likes this.
  10. Skibob

    Skibob Senior Member

    Joined:
    Sep 14, 2018
    2,912
    1,497
    0
    Location:
    Northern California
    Vehicle:
    2006 Prius
    Model:
    N/A
    Changing the oil does not turn the light off. You have to manually turn it off. See your owners manual for the details.
     
    #30 Skibob, Jan 24, 2019
    Mendel Leisk likes this.
  11. dirt657

    dirt657 Member

    Joined:
    Dec 1, 2018
    159
    42
    0
    Location:
    Arroyo Grande, CA
    Vehicle:
    2010 Prius
    Model:
    N/A
    I know that. Lol. I’m saying I’m going to change the oil and then turn off the light. The car needs one. I should’ve been more clear
     
    #31 dirt657, Jan 24, 2019
    Skibob likes this.
  12. Skibob

    Skibob Senior Member

    Joined:
    Sep 14, 2018
    2,912
    1,497
    0
    Location:
    Northern California
    Vehicle:
    2006 Prius
    Model:
    N/A
    Gotcha, mine turned on yesterday. Going to turn it off Saturday when I change the oil. ;)
     
    #32 Skibob, Jan 24, 2019
(You must log in or sign up to post here.)
Page 2 of 2