2015 Prius II - Front Seat Stock to Power/Lumber OEM Prius IV/V DIY

Great question, did this question ever get answered? Did you happen to solve it yourself?

 

That’s a good question and been waiting for a answer as I’m planning of getting the Lexus ct200h seats

 

@FriedCells
@tallprius
Did you ever test the heat with your Lexus seat? I live in the Midwest and I am curious to know.

Also, the clearance issues for the seat being too low, is that when the seat is adjusted all the way down? If the seat is in a raised position, are there still clearance issues with the box underneath the seat?

 

@FriedCells
How does the ct200h seat back height compare to the Prius? It looks like the Lexus seat back may be a bit shorter?

 

If I remember right there was a thread about that. They kept going back and forth and I think the finally came up with the Lexus seat was an inch shorter.

 

I'm guessing that doesn't matter since the track is what moves back and forth as well. The track doesn't go up and down with the seat (I think?).

 

I am planning on getting the CT seats as well, but I read in another forum about the Lexus seat using two positive while the Prius seat only has one. They also said you need to splice the positives. Someone else asked what that meant, but there was no response. Which positive and where are we splicing?

 

I just swapped my driver's seat for a CT200H seat. I am going to be making a separate thread that's actually titled fro a CT200H seat so it's not confusing.

 

wel.. i know this is gen 3 area and now im gonna try to fit a Gen 4 Prime seat into the Gen 3... was looking for where someone mentioned the colors on the wire harness and such.,