1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2012 prius rear brakes.

Discussion in 'Gen 3 Prius Main Forum' started by Andy H., Jul 10, 2017.

  1. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,221
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Hopefully not an anti-seize molybdenum paste? That stuff is good for shim to pad to caliper contact, but definitely not good for pins. Again, Sil-Glyde Brake Lubricant is one readily commercially available pin lube, can be used on rubber boots, and bleed bolt caps too. You probably recall: the stuff on there from the factory has that pasty silicone gel appearance. Toyota sells something too, has a pink tint? But Sil-Glyde is tried-and-true.

    IMG_7165.JPG
     
    Robert Holt likes this.
  2. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,904
    16,213
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    The last time I bought a factory caliper from Toyota and took it apart, the stuff in there was, recognizably by sight and smell, the pink lithium-soap-based glycol grease that they sell under the name "rubber grease" and refer to in the manual.

    I've never tried Sil-Glyde so I won't say it doesn't work great. (I still have a tube of Ford's old silicone brake grease from years ago when I had a Ford, and I use it for all kinds of things, on cars and off.) But for the record, Toyota has not spec'd a silicone here.

    -Chap