Attachments are working again! Check out this thread for more details and to report any other bugs.

2005 Prius won't start after replacing a bad cell in main battery pack.

Discussion in 'Gen 2 Prius Technical Discussion' started by Kruso, Oct 30, 2011.

Page 2 of 2

Joxuel New Member

Joined:

Feb 28, 2020

19

3

0

Location:

PR

Vehicle:

2005 Prius

Model:

II

T1 Terry said: ↑

I'm guessing you have double checked that the orange plug is both locked in and slid up/down into the on position. The contactors are powered from the 12v battery so that says that part of the system is ok, so the next thing to check is if the fuse in the orange plug is ok and measure the voltage between the 2 contactors on both sides when the system is in the on/start position. This is to check that the contactors are actually engaging properly. If you don't have the correct traction battery voltage or no voltage, there is either a cell link missing or incorrectly positioned or the orange plug is not fully in the lock position, or the fuse is blown. As mentioned previously, there is a safety switch that needs to be engaged when the orange plug is slide up/down to complete the battery connection sequence. There is a small plug that goes to that safety switch, just check that it is plugged in as well.

T1 Terry
Click to expand...

I was thinking that maybe that fuse was blown, i will doble check and do all the steps. i will keep the chat updated of the Mission

#21 Joxuel, Mar 1, 2020

(You must log in or sign up to post here.)

Page 2 of 2