Separate names with a comma.
So I removed the battery and there is corrosion across the terminals. Is it common for P0A80 codes to come about from corrosion after the...
curious, not to threadjack but, can you remove the engine while leaving the transmission in? is there enough space between the engine and the body...
From what I understand it sat for months. Also, I checked it out on my working Prius and its within 0.1V of each other.
What is the acceptable tolerance in terms of voltage variation?
Hello all, some of you may remember my write-up on how to remove a transaxle on this forum. Since then the car has worked beautifully until I lost...
Never heard of that stuff, I got to give it a try. I used a similar technique with canned air to get the wheel bearing out of the hub. Used it to...
Ed, again thanks for the input. I shotgunned a wheel bearing though and that was it. Oddly though, it only started making noise when the bearing...
I hate shotgunning parts, but i'm just going to buy a hub assembly tomorrow and put it on to see if it is the problem. If not, well. I better look...
Also, the sound is entirely speed dependent
Yes, to clarify... the sound is only audible around 70 mph. Not sure I want to spin a loose halfshaft at 70 mph, even with the axle out of the...
I thought about doing that, but if i pull the halfshaft, won't fluid start coming out en masse? also, not sure how i could do it safely.
So I decided to lift the car onto jackstands, turn off the traction control and inspect the sound. It is coming from the passenger side wheel....
This was originally put into this thread here... in different parts and scattered. Shorted MG? Codes pulled. May need transaxle. | Page 2 |...
I'll dump the tranny fluid this morning. If it is a bearing failure, maybe I can just take the MG2 out of the transmission and put it into my old...
Also, I finally got some time to upload the rest of the pictures.
Which bearing? is it replaceable? or should i start calling in the warranty for this transmission?
Update: So I noticed while going on a 50 mile road trip that the car makes a speed-related like whining sound. Sort of gear meshy. It is very...
PM'd you back
Edit: DIY Transmission removal has moved to this thread: DIY: How to remove GenII Transmission | PriusChat
I just undid the 4 bolts holding on the rack and pinion, and the 2 bolts holding down the sway bar end links
