Separate names with a comma.
So im curious if anyone has any input on why with this degraded pack am I getting 53mpg? Could it be that the prius charging system is injecting a...
Ill do a mpg test in city with the AC on and see how it does. Guess the drop in mileage may be worth it as battery insurance. Or maybe just run it...
I'd probably only run it on the highway. Im fine with the windows down around town.
Update: took the prius into the mountains, got back with no issues. Was 44mpg avg after the trip. Reset my computer to record city only mpg, so...
Thanks, im gonna drive it this weekend and try to stress test it and see what happens. Heading to the mountains, ill report back with avg mpg...
Update: 20 miles driven so far, climbed to 40mpg avg after reset and the 20 miles. These were city miles as i didnt want to hit any highways yet...
X2 My numbers were way lower. I would have loved to see numbers like that, and they are improving each cycle, mine were sometimes not.
Update. Battery is in, pulling no codes. Test driving tomorrow. Prior to this, codes showed up within 10 seconds of starting. Running without...
Wish I would have thought of this!
You have a good charger, and you're doing fine. Its all a matter of situation to justify a 4 port charger. And the hitec x4 ac has its...
The zig zag harness is a pita, and takes time, and you must be careful. The wires are exposed at the ends and you dont want to let it short out...
Your right, service plug comes out as soon as you pull the carpeting. As far as the wiring... it was speaker wire with one side silver and one...
The only time they're in series is when the buss bars are connected. The voltage equalization is done with a wiring harness in parallel. Once you...
I only continued this process for practice and to see if I can get it matched up to pull no codes and to drive it a little bit while I round up...
So... further testing has resulted in 4 other modules that load tested bad.. 2 more sheets of paper full of numbers that are gibberish to a non...
Good to know, thanks! Ive tried to read as much as possible on this whole project but I have often seen conflicting information. Guess everyone...
Sounds good ill be doing the load testing later today. Then arrange the mods according to voltages and load response. After this, is is still...
Ah I see. So would the best thing to do is pair higher voltage mods with lower to yield an average result? My mods range from 7.75 to 7.91 so I...
Im seeing some voltage drop in a couple other modules so am going to swap them out as well. Anyone know at what point a voltage difference in the...
Thanks for the input. Ill be researching some more tonight and tomorrow and hopefully find the right direction to head in.
