Separate names with a comma.
I had leak in my transmission, I swapped it out with a same year Prius v that was rear ended and the transmission only has 62k miles on it. After...
Used a seal setting tool , it’s in straight and proper depth
[ATTACH]
Yes I used a seal setting tool . And I also replaced thos damper and flywheel thinking tbry could be the cause .. originally I used the ones from...
No , I have pulled the engine 3 times. Replaced the transmission input shaft seal 2 times now after initial engine swap. I have changed the damper...
I had same leak in location . It’s the transmission input shaft seal. Mine disintegrated. I replaced but didn’t know depth to set seal at so when...
Backside of seal
transmission input shaft seal … not rear main .. the seal seats in the center of shaft . I don’t know if oute edge seats fully .. I don’t want...
M leak was definitely from transmission input shaft .. it was red trans fluid and when I removed engine there was a trail from input shaft and the...
Backside of old seal, you can see it self centers around input shaft
I removed a damaged seal , I cleaned surface well but want to put seal in properly without destroying it. I see it goes over a raised edge and...
With dampener slid on transmission it was scraping remaining seal .. I filed back in shape and now it doesn’t scrape Now I need to make a post...
I found issue .. plastic piece was smashed , probably during shipping and I didn’t notice it.. it was smashed and little tab was out more.. it...
My transmission still in car and motor is out , torque plate is on engine still. No way to just slide it on and see .
Hello, I swapped in a JDM engine into my wife’s Prius V. After doing so everything went great except a massive trans fluid leak . Pulled engine...
Did you solve this issue? I did exact thing and input shaft seal leaked and I’ve now pulled engine again and want to not have to do it again!...
