Separate names with a comma.
I haven’t done the other 2 yet. That involves dash disaassembly to get to the ecm
That test was 17.4 ohms at 74 degrees air temp
Would you still question the sensor even though it was in specs on page ES 79?
I’ve got all of that information. That’s why I was down to testing the relay. The sensor is a denso. There was no splice made the thief cut...
I have voltage on the 15 amp. I also have 8.87 volts at the car side of the wiring harness between the two black wires that control the heater....
Sorry I missed the diagram. Let me see if I’m smart enough to read it
I am in way over my head. But I just needed a little guidance. I got the test done with RJs help
What is the location of the fuses? The relay checked out good. Thanks for the correct connections.
All of this happened when the cats were stolen. The downstream sensor is new and I cant see both sensors being a problem at once. So Im inclined...
Just checking did you guys see the trouble codes?
When I connect the multimeter from 1 to 8 without the12v power it stays on 0. So I'm assuming it's bad ?
I have codes P0038 and p0032 which refers to the heat of the oxygen sensor. And according to the wiring diagram this relay controls those sensors
That's 2 wires from the positive cable to 6 and 7?
Can someone tell me the proper to connect battery voltage in this test. See attachment
