Separate names with a comma.
Hello, I need to replace the rear brake shield on my 2008 Prius due them falling apart and causing issues with my emergency brakes not working....
Got the rear brakes all back together and they are greased. The last issue before I can bleed the brakes is that the hard rear line on the...
Great, I will get some of that. Thanks
I used a small butane torch on a can. I will get some of this for the pins since it is safe with the rubber: Jarrusylinterirasva - Biltema...
Guess you can't delete a post.
The big hammer always wins! :) I got the pieces apart with some heat and the hammer. I am debating on if I should change the calipers. Hopefully...
This is all starting to make more sense. :) The sliding bolt was threading out of the mounting piece or tightening on the other. The caliper and...
They are the first type in that video. :eek: That is the problem they are not sliding since they are so rusted. Don't think they were lubed and...
The first set of rear brake pads were the wrong ones so I got some new NK pads and the the caliper when lowered hits the outside pad. Seem it is...
Thanks, that was helpful. I got some photos I can post later. Does the spring turn the star adjuster at the bottom? Are they self adjusting or do...
I am replacing the rear brakes on my EU 2008 with rear disc brakes. I took photos of the emergency brake shoes and parts before taking them apart...
I ended up pulling the whole knuckle and taking it to a shop with a big press. The inside of knuckle hole where wheel bearing assembly goes in had...
I marked and pulled the knuckle. I tried to hammer it out with no luck. I am glad I pulled the whole knuckle I think a press is the only thing...
I am in the process of changing out a bad front wheel bearing. I pulled the axle shaft out of the way to give me more room to work. I live in an...
