Separate names with a comma.
Hi bob, The car rolls NOT freely atall, BUT I was thinking thats normal when you have a car parked up for around a year... (discs sticky & rusty)...
Another thing to note, is that the rear wheels seem to be quite jerky when I try to Manouver forwards etc.. Something to do with regenarative...
Hi Bob, The inverter is installed back in place, & pumped back the coolant that I originally drained out... I had disconnected all the coolant...
Bob I am working on this specific Post as we speak............
Took apart the HV Control ecu, & re -seated its connections.... (so they are all visible) No nasty stuff all Look clean as a whistle... *& just...
YES the 12v AUX battery was disconnected when removing the OLD HV battery, & was only connected back up WHEN the replacment cells were fitted......
Guys I would hate to say it, BUT please! Lets be professional about this We are here to help Each other... (I can understand All of your...
Still working with the volt & ohm meter, (& my Obd2 scanner... Its sees 3 modules in total communicates with them, & shows me the PID's that are...
Thank you jk450, & Bob wilson... I am still hurdling with my prius, I am unsure what to do next.... Reading away about the basic principal of...
Heres where I am educating myself a BIT about the prius... AUTOMOTIVE TECHNICAL ARTICLES My eyes are watering from reading the PC screen......
I am with the car right now, & tested the battery voltage which was 13.8 volts whilst the car was on... I can confirm the inverter coolant pump...
Thanks Patrick for your views & help.. IS the "ready" light meant to come on Before I switch on the Ignition to start the vehicle? As mine only...
(May I add, I have another nhw11 battery here, & Am in the process of giving it a look over... IT also came with a HV battery ECU, & was from a...
Hi Dirk, I have the Same codes as you! P3125 P3100 Only I have NOT had a collision... (from this post...
So after alot of trial & error, With the help of a Friend, I got to charge & discharge the modules, a good few times... Talk about watching paint...
Hi again Bob, Just to clarify: Are you suggesting I use a Charge current of 1a? & charge a charged module a few times? & then do discharge?
Just done my 1st charge, (Which BONGED out Because of an Input low voltage, Caused by my 12v Rechargable power supply) But heres the statistics...
(*Thanks for the Fast reply Bob!) YES!!! (I have tried my 900mah, 8 cell, 9.6v nicads , & my 2400mah, 5 cell, 6v Nimh's) BUT Now have moved...
Ok Bob! Understood! I have been Getting Jiggy, with the pro peak Supernova charger, with some other batteries I have lying around, Not all that...
I have also been trying to do a LOAD/stress test of a Module, Can you please advise me of my readings, Are they correct as in, Am I reading the...
