Separate names with a comma.
Where did you get the neat inverter picture? Fast response, yes the inverter 3 phase drives result in pulsed current from the battery, but with...
I've just noticed kk6yb responded at the same time i sent my post above, so I was responding prior to reading his new post.
Quick update: I am probing the hall-effect sensor, which in my Fluke 336 fortunately has a low impedance driver, feeding it into an analog to...
I don't quite know where best to post this, so I'll add it here. I've been puzzled for some time about apparent contradictions in power from the...
Your referenced web site says the RGB O/Ps have a DC offset which means they are coming direct from a transistor which is why they need a...
Hi Nicholas. The web-site you refer to here certainly implies that the outputs from the SNES should be directly compatible with the Prius MFD....
This has been covered elsewhere, but I realise searching priusChat can be difficult. The 2004/5 MFDs are identical in NAV and none-NAV Priii as...
Hi ScottY, I display on CAN-view the SOC that appears on the CAN bus as-is, without any filtering or manipulation other than to make it a...
December 11th update. Working with Frenchie and his with-NAV Prius, I have now resolved the last software issue and can state that the standard...
I have a Prius MFD on the bench for testing CAN-views and a multi-standard signal generator, so I can contribute what I've observed. The...
I just happened to read this post and thought I might save a bit of time and some disappointment. Only NAV equipped Prii have any RGBs wiring at...
You are absolutely right. CAN data is 2uS per bit so thats a maximum of 500K baud, but that is only achievable if there are absolutely no gaps...
Slightly off-topic. In the course of debugging the 'with-NAV' version with Frenchie, he added that his reverse camera didn't work automatically as...
Sorry, I meant both the software resident in the AVIC and the software I had to rewrite in the CAN-view. They have to send over a dozen messages...
All I can say is that it works with the Pioneer AVIC-88 DVD nav system. The software to make the two talk to each other seems unnecessarily...
I assume you mean unplug the 9 pin Molex from the CAN-view behind the glove box and unplug the OBD2 connector, there is no justification for...
Yes, factory NAV has a cable from N3 on the NAV to M14 on the MFD. So you could either connect a CAN-view right at the back of the MFD or right...
Ok, I make that 5 people interested so while waiting for Frenchie's 2 parts to arrive I have ordered 5 matching sets of connectors from...
I don't know. It would help if some kind person would post pictures of the VAIS unit on PriusChat, with special attention to all connectors. As to...
A reasonable question deserves a reasonable answer. Here is the status about CAN-view with NAV. According to Frenchie, the version 2 unit he has...
