Separate names with a comma.
Hello, I am interested in seeing the current (amps) being supplied to the 12V battery by the system while the car is in Ready mode. I have an...
Just curious. With these gauges that come with rubber hoses, how much pressure loss would there be with each pressure check? Also, anyone that...
Did they perhaps disconnect and reconnect the 12V battery as part of the check, causing things to be reset?
Did you and Animal end up getting the starter guard taken out or charged-up/replaced the 12V batteries?
Have you installed one of these and if so what has been your experience? I have ordered the Battery Brain Bronze, so curious.
zeeman, Have you left the StarterGuard in place and if so, did it ever come of use? TIA.
Under normal day-today operations, what you say holds true. But, there are many tales on this site of the parasitic drain from the Smart Key...
I am seriously considering this; seems like a respectable company based on the FAQ, etc. My biggest concern was what would happen if the thing...
[media] On doing some more looking around, I see: http://www.batteryguard.net The "Type I" seems like it might work. It would be great for...
Also, I have never disconnected the battery.
I have always hooked it up directly to the battery. I figured 4.3 Amps isn't much different from the factory recommended 4.2 Amps for charging....
As you are perhaps aware, 12.1 at the terminals is still at the low end (likely at least half discharged); mine typically reads about 12.6V in the...
Just curious: how short are your day-to-day commutes (one way)?
If I leave the SG (ScanGauge) cable plugged into the OBDII port but disconnect the SG unit from the SG cable, will it still result in any...
Another useful item would be a battery over-discharge protector that will automatically disconnect the battery if the voltage falls below a...
What I have learned from this thread (apart from not taking jumpstarting lightly) is that in the event of any electrical issues being reported, I...
Sorry, I was not clear in the intent of my question earlier, which was to make sure the battery isn't fast-charged by the jumpstarting event or by...
One thing I have been wondering about, if I ever have to jumpstart my Prius: Disconnect the negative terminal, jump the car using the positive...
Thanks for the explanation. I do see this behavior, it does fall to 13.5 volts after a few minutes of driving. One thing I have noticed though is...