Separate names with a comma.
The only way to make a used smartkey work 100% "smart" on a Gen2 Prius is the "reseed" the smartkey system. This requires locksmith credentials...
If car is less than 9 years old should qualify for free combination meter replacement, talk to the dealer. If you have to pay out of pocket, the...
Battery ECU's rarely fail. I've replaced 1 ECU and well over a hundred hybrid batteries. Battery ECUs can be swapped out without any...
I second the idea to contact OVNI on PriusChat. He does emergency keys for Gen2's, maybe he has them for Prius C.
KathyinMinn easiest is to replace the entire steering lock assembly, shifter, shift position sensor with a salvage unit. The fact that you can...
All Gen1's already have the complete wiring harness for cruise, software, and light on the instrument cluster. It's probably the easiest car in...
Adding cruise is really easy, especially if you have steering wheel with cruise stalk and 4pin brake pedal switch. You don't even have to open...
Depending on your year and INF (subcodes) the following TSB EG058-06 may apply (replace HV ECU with updated unit, may be under warranty, check...
The only way to program a used (ebay) FOB is by doing a "seed reset" with techstream. Dealers COULD do it, but many don't know how or don't want...
You can always try searching on Ebay or Car-Part.com for a used genuine OEM part. Some yards damage them when removing so if you order from a...
I will be bringing my Smartkey programming equipment to TGB4. If you need an extra Fob made I'll be able to do it onsite with "special event...
If you are buying a used or rebuilt battery, I suggest you always get from a local vendor with a decent warranty. Many "rebuilders" have issues...
This is the guy in El Sobrante www.lowpricekeys.com He is on PriusChat as Ovni I'm sure he'll let you watch if you are concerned that he'll make...
You don't need any tools to unhook the 12V battery to reset computers so you can do it yourself anytime/anywhere. While working on cars it's...
It's easier to just replace the rear hub/bearing assembly since the ABS sensor is part of the hub assembly. It shouldn't be too expensive from an...
Ok so after doing quite a few Gen2 front wheel bearing/hubs (many from "rust belt" states) I have this advice, remove the entire knuckle and try...
That is a decent option, but quite a bit of work to swap out the parts under the dash if you've never done it before.
If the OP would state their location someone might be able to refer them an independent shop that can help. There's a few of us around the...
Thought I share symptoms (and solution) so the next person who encounters this problem can save some time. Customer bought a used 04 Prius, no...
To get a "used" smartkey fully mated to the car it will require a Seed Reset. Not many dealers will do this and very few independent shops have...
