Separate names with a comma.
Yes! Thank you all so much. I ended up ordering "Sponge Neoprene W/Adhesive 12in Wide X 1/8in Thick X 54in Long" on Amazon, cutting it to fit, and...
This diagram suggests the metal strip is just part of the same part number as the fender liner. I guess I can replace the whole liner just to...
Did you have any luck attaching 53852-47010? I broke the bolts attaching it (snapped the heads of both, then destroyed the opposite side of both...
From what @alftoy wrote ("If you get them from Ebay, make sure they have the metal backing.") and from what I've been able to glean from other...
Thank you! I'm not sure how to send a PM (I'm new to this site) so I followed your profile link to your web page and sent you an email...
I'd love to try to remove and replace that metal part (and the two plastic pieces which attach it) if I could figure out where to get a...
Thanks! Not sure that I have a drill bit which could drill through that metal plate, so I'll look into that option. I've also asked the local shop...
Part 53852-47010 is a piece of rubber which attaches in front of the left front tire. I presume it's there to reduce the amount of stuff from the...
I'm replacing my hood latch release cable and hood latch. The new hood latch didn't come with a sensor, so I want to move the sensor from the old...
Thanks! As it’s apparently not part of the car, I expect it is probably an emergency key for an interior house door (the kind of lock with a push...
Thanks - I really appreciate the advice regarding getting new fabric and using a thicker foam. I went to a lot of trouble to get the original...
I'm a new account holder, but have benefited for years from the content on this site. Thank you all so much. I have just removed the console lid...
With my Gen 2 Prius parked in my garage, my kids were playing in the back of the car while I was working on things in the front. Later that day,...
I'm not sure what this is, but my child claims to have found it under the floor of the hatchback area.
In my case, the lid came apart (in a good way) after just removing the six Phillips head screws on the underside of the lid. I then removed my...
