Separate names with a comma.
So Wednesday our '05 with 92K on the clock throws a the P0A80 (the death card for the traction battery) as confirmed by the Toyota dealership. I...
Tally another lost hybrid battery. Ours expired last night P0A80 (dealer pulled). It's evitable with cars of this vintage ours only has 90K on...
I believe it guards the positive battery post on your 12 volt aux battery which is immediately in front of the passenger tail light. Take a look...
The first thing I would do would be is establish yourself an account at Toyota.com and do a VIN search for the vehicle's service history. Any...
What they said. The real money is in the labor to straighten everything that was compromised as a result of the accident so that all the...
If you can run the CHS with the vehicle on jack stands or at least the pass. side that can aid in removing trapped air in the system as well.
Good for you for doing some research and recognizing your CHS pump was not sounding normal. As you have discovered, regardless if you use an...
David, you may need a 1/2" breaker bar and a length of pipe to break the tensioner pulley nut loose. Use only 6 sided sockets if you can. Buy a...
Good times my brother. Any one who does enough DIY repairs will eventually find themselves in similar situations. Props for sticking it out....
Presumably this question is for the 12 volt aux battery and not the HV battery. For the 12 volt aux. battery use baking soda, warm water and an...
I hint might be to check Clazzio's website to see if they list different part/kit numbers for an '05 vs '09.
Most likely you are not leaking oil you are burning/consuming it via the combustion process.
Juan, you will need to pull the DTCs for anyone to offer coherent assistance even if this means paying a diagnostic fee at a dealer. Or...
If you subscribe to Luscious Garage on Youtube they mention that they do several pumps a week in the San Fran area. The "new" design doesn't seem...
The bumper and license plate bracket are cosmetic. The real issues are the energy absorbing foam and frame member are now compromised from doing...
They are on separate closed loop systems. Start looking for your leak(s) sooner than later. If you destroy your invertor due to lack of cooling...
Yup, otherwise I bet factory HIDs would be a rarity as these vehicle age. Again this is a doable conversion it's just not a plug-n-play conversion...
My experience with using Walker's model specific parts diagrams has been favorable. Granted it was in another vehicle's application but the point...
Cephyr13, I don't think the HID to non-HID is quite that simply. I looked into doing this last winter after my wife slayed a deer with the PRI,...
You need a new or at the least an alternative mechanic, and parts house monkeys are just that. You need an OBDII reader to scan for any DTC....
