Separate names with a comma.
1. Yes, 280ohm when resistor in place 2. I’ve checked resistor and now it shows 0,5Ohm 3. When resistor unplug there is no connection between...
Previously Relay 2 run pump when I used Techstream and option to turn on that relay. Now with resistor disconnected it is turning on also when I’m...
I’ve disconnect the resistor and multimeter say - 0,00-0,02 in diode test. But another strange thing happen - with resistor disconnected, the...
Ive checked some things. First, after a 14h voltage on accumulator sensor drops from 3,76V to 3,66V so I think it is pretty ok? Next I checked...
it is this point at schema right? As I can see the resistor have blue connector with two black wires so I have to check if there is a pass...
Hmm, so maybe I will try doing this and check the wiring from relay to pump. The 12V have to miss somewhere becouse motor is running good with...
Hmm. Is there any possibility to check relay socket? I don’t have a workshop to remove windshield etc to get to pump wires :( can someone say...
Ive had a Wire diagram. It have a voltage in PIN5. The MR1 and MR1+ works because the relay is clicking. Next is BM1 but it is in Brake Accuator...
In my problem pump is not running now - relay 1 have issue as described earlier so what I have to do next ?
Car start, I can drive but I have 3 icons on Dashboard, hard pedal and no recuperative breaking + beeping sound. When I use few times Motor Relay...
I’ve just checked it and it clicks so as I understand diagram problem is at Brake Accu? I will have to check BM1 and 3 pin at Relay 1 but BM1 is...
Hello. Ive got C1252 and C1256 error sometimes. Ive tried to make Linear Valve Calibration and it doesn’t make - few days ago the motor works when...
Thank you. Someone have idea what more I can do before replace actuator?
Can you send me a Techstream procedure to air bleed?
Ive got Techstream and tried to do Linear Valve Calibration and I’ve got C1345 and C1368 errors :( I’ve tried at ignition, at Ready and all time...
It’s cheap option and worth to do, I will try for sure if maybe something else don’t help?
Hello. I’ve got yesterday a blinking icons and beep sound + hard brake pedal. It was for about 200m and then it dissapers and everything works...
I put resistor and original AC control works but i cant connect CanBus to Andorid Head unit. Steering wheel controls works but I cant control...
So you can just buy leather at put it on a velvet seat?
[ATTACH] [ATTACH] [ATTACH] [ATTACH] Hello. I’ve bought CanBus Android Head Unit 2GB for Prius 2 at the AliExpress and I had some problems which...
