Separate names with a comma.
The video below is about the difference between the Prius transaxles in the (first and) 2nd and 3rd Prius generation transaxles. I gave me some...
This is good to know. Please post ("before & after") photos if you can! It would also be good to know if there's any different nuts being...
Took me 6 months but I only had one Hitec X4.
I agree, the copper bars do require more "elbow grease"! I'm curious about the nuts you mentioned, having paid about $0.50 each for used ones,...
It has been posted on this thread, more than once already I believe. I would have to look it up. First two digits are the day of the month....
I also tried to clean the nuts with a (lethal) combination of cleaners (distilled vinegar, Zep505 and hydrogen peroxide - don't try this!) but...
I tend to agree but I have to ask (rhetorically) whether there is a production or engineering (design) quality problem that has not yet been...
According to my experience with the DTC codes, the thirteenth pair of modules is near the end with the computer or ECU unit is located....
!!! So, I'm wondering because you mentioned it, should the Velcro be on the inside or the outside of the gloves, or both and why? :D I can't...
I can understand why they would want to remove extra hardware to save money and labor costs. Without adding hardware, the Prius is only able to...
How many months ago? I'm asking only because mine has been off-line since May while I am playing with the hv battery and hobby charger. :) When...
I bought a couple new remote shells on ebay. The old ones are glued together - probably super glue. I used a hobby knife (Xacto) to start...
If this is actually productive and useful, it may be an opportunity for an after-market manufacturer or an entity with the engineering and...
I left my Prius sitting without running it for some time, at least a week and then pulled the battery and measured the voltage of each module with...
My bad. So the pin number has nothing to do with the module number. Thanks, Brad.
Did I do something wrong?
I may be showing my ignorance, but here goes. Theoretically, if you compress the mixture up to 9.5 times and then allow the exhaust gases to...
The 32 Volt difference would indicate that there is some shorting happening or perhaps that some sensor wire contacts have been mistakenly...
.08 dB Thanks. I guess I won't pay any more attention to that, then. I haven't gotten into Tech Scan or Torque very far but I'll be wondering...
I do hope that that tiny bit of lubricant will help prevent corrosion and lengthen the health of the battery connections. I live near Augusta,...
