Separate names with a comma.
True enough but a higher amperage unit will charge a low battery faster and will trickle charge when full so it is the best of both worlds.
Noco chargers are good, but I'd go for one with a 4 A output rather than that 1 A. The advantage of the 4 A charger is it will charge faster (4...
This is not balancing, it equalizing and is largely a waste of time. There is not enough of a voltage potential difference between any of the...
This is blatantly untrue. If you are going to make such statements, you need to state the source documentation (that does not include, "I read it...
Maybe you found out why it was removed from the donor car.
It would be best if you could the car drive more often than twice a week. If you cannot fit three or more drives in this vehicle of 20 minutes or...
16.8 V per stick.
You shouldn't need to worry about the gas or the oil sitting for 6 months. If you feel the need you can change the oil after fitting the new battery.
What is your driving pattern with this car? Like, how many miles a day and how many days a week are you driving?
P0A93 is an ECM code and will switch on the MIL (message information light aka the check engine light). If you had the Master Warning Light (Red...
Yes, they are NiMH. Grid charge at 350mA until 235 V. I would actually do a full top balance charge if it were mine. You can search the forum...
These misunderstandings are not unusual for the new Priuser. Putting the stick in “B” to get max re-gen is actually untrue. You get less regen...
You're just asking for trouble. To this point, the battery has given no indication that there are any problems in that area, so you risk muddying...
Yes, it does and at that level, the car will not attempt to start the engine. The battery needs to be charged up to 210 V or more so one or more...
This DTC is output if the Hybrid Vehicle battery is depleted or the Hybrid Vehicle control system has a malfunction. I'm going to go in the...
... and you need to drive the car for 20 mins or so to activate the transmitter.
I think it is more likely the 10-digit (hexadecimal) number: [ATTACH]
Generally, when they get to 1.2 V below the other that's the end of the road for that module. They need to be similar in capacities. Voltage...
It is quite normal to stay on the first pip for a long while and at 250 mi it is probably getting to the point where the first pip will disappear....
Someone on r/ ask a mechanic is blowing smoke – it can't.
