Separate names with a comma.
If anyone really objects to paying about US$ 8 + 10 for access to the full licensed set of (non-registered) Techstream PID data, and has the...
Here is part of a (1 sec interval) log from today in my rav4 HV that shows (among other things): (a) regen without friction while pedal is...
So (if I have understood correctly) in terms of the OP’s opening question: The short answer is no, the rear friction brakes in a FWD HV with...
I see PIDs for ON/OFF Status of each of the ABS Solenoids shown in the Brake Actuator Assembly (SFRH etc). Could that help?
So what would Hobbit use to sense friction braking in a gen 4?
That article by Hobbit, linked by ChapmanF, is excellent to understand better how far from the idealised examples is the real braking algorithm in...
Modern OBD readers are fast (100 PIDs per second with OBDLink MX+). That should show everything implied in the idealised examples. But, in support...
As an example, here is a log that shows (a) friction braking at low speed, (b) regen. without friction braking at higher speed (c) engine braking...
Still looks like a highly idealised 'example' to me. Must surely differ depending on how hard the brakes are pushed. Often regen. alone in my...
I take such 'idealised' graphs with a grain of salt. Here is a closer view of the real log above. When the vehicle speed is decreasing quickly, we...
It may be similar (if a bit more complicated) in an AWD HV. In my gen5 rav4, the Toyota rear motor brake regen PID always shows zero, but I think...
After a few days of no driving (with no accessories attached) the Auxiliary Battery Dark Current readout drops to 0mA. If that is correct, it is...
All true, and anyone with the expertise and equipment can 'discover and deduce' the PID addresses and formulae. Some early Prius fans did that,...
The OBDLink devices can reveal ~100 PIDs/second for PC & Android. According to Wikipedia, classic BT has a maximum data rate of 1–3 Mbit/s (vs...
Prof: Toyota hides its (non-legislated) PIDs very carefully, You can read more here, but the short answer is to use an OBD app (like OBDLink) that...
Has anyone else wanted their OBD app to automatically re-connect each time the car is started? Probably this is only important to those who use a...
Just out of interest, HA (with OBDLink MX+) still does not work with an Australian 2019 (gen5) Rav4 hybrid. Although the HA site says it supports...
For anyone interested in the “Aux. Bat. Dark Current” PID, I think I have worked it out. At least I have understood why it gives me very different...
Thanks Elektroingenieur. It is good to have another (paid) place to look. I guess that means that the information actually reported by the...
Sorry PeterJ, I have not checked in recently, so did not notice your post (thread hijack). There are many threads on many forums and commercial...
