Separate names with a comma.
Thanks again ChapmanF. On first reading I did not fully absorb your important observation that most sensors (and actuators on the output side) are...
Thanks ChapmanF, not sure if I would know how to interpret topologies in a manual but I will look. OBDLink will read SAE PIDs and one OEM...
I have explored this a little more (with some input from OBD app developers). The priority set for PIDs in OBD apps is a ranking of the frequency...
Some OBD-II apps allow users to assign a priority to each request for PID/sensor data. From my limited understanding of the CAN protocol, priority...
The Toyota service technician said that the stop light was fine. I think the sophisticated test applied was to press the brake pedal firmly and...
Bob, I checked - my fridge light works every time (geez it is cold in there, and no PIDs). Shame the same does not apply to Toyota HV brake lights...
It certainly makes sense that the loud clunk when the brake pedal is pushed comes from the switching solenoid valves (diagram attached). There are...
ChapmanF, you were right that my guess about that clunk was wrong. It is quite audible while sitting in the car in park. It clunks at stroke...
Thanks again guys. Wouldn't this show up in the stroke sensor, and so meet the quoted regulations? Of course, both an ECU and a switch mounted...
In post #11, Elektroingenieur wrote about several things, including RAV4 HV models. I can only say what I see and hear. After some reading and...
What I called "the solenoid" is probably better called "the relay" described in post #11above by Elektroingenieur
Thanks again ChapmanF. As mentioned and photographed, the orange/brown rod is already protruding (within the range you mention) and in contact...
Thanks again ChapmanF. I got down, pushed, prodded, and photographed the switch. [ATTACH] When the push is gentle (but evidently enough to...
Correction: The car CAN PIDs through the MX+ are only changing every 3-4 seconds, no matter what is set for polling interval, or reduced number of...
First, many thanks for all this input. As promised I have logged at faster speed (0.2 seconds) with only 14 PIDs. Actual polling rates are a bit...
Thanks ChapmanF. Sorry, my bad typing / mind for dates, should be: 2019 AWD rav4 HV (AXAH54). Where do the years go? Sounds like PID "Stop Light...
I am using a 1999 AWD rav4 HV (AXAH54), logging Toyota PIDs at 1 second intervals using OBDLink with MX+. Because the car has dynamic cruise...
The short answer is NO. The longer answer is not necessarily in brake-by-wire Toyota HVs, to my great surprise. See the log below. The car...
Thanks Trollbait, very interesting. Yes, the 1999 rav4 AWD HV (AXAH54) uses the Q610 rear transaxle with "Electric motor - 4NM (40 kW / 120 Nm),...
The short answer is No (at least in my experience with a gen5 1999 rav4 AWD hybrid). But green arrows appear on your dash display, and move from...