Separate names with a comma.
I just set the DC6 to discharge to 7.6v. I checked them with my $5 Harbour Freight multimeter and chalked up the differences in voltage to...
I did not connect in parallel, as that is what I thought the discharge to 7.6v was supposed to do. Which brings up the question, at the risk of...
I'll check it out. What about the scanner that connects to your phone via bluetooth?
When you first power up there are 3 clicks coming from the battery, then the beep. It's like it's running a test that it instantly fails. I just...
Also, last night, whenever I would power the car up, there was a loud beep. Just one. I just went to clear the codes, and one second after...
Got it all back together last night. All lights and the fan are still on. I drove it for 20 mins and so far no go. It also seems to sometimes go...
Congratulations on a fine job and write up! Things aren't going as well for me.
Update?
The lowest voltage module is 7.68v, so I'm discharging them all to 7.6v. I set an hour wait between cycles so I could stop it before the charge...
Ok, got the case back together with the new module. No problem as it was the first one. My last 3 modules are happily charging. Advice please:...
#6 and #27 look suspect. Perhaps another cycle would help? Two Y's
Sideways, outstanding idea! Hopefully I'll be ok as all the bottom screws are in and the module I cracked is the very first one. Maybe it'll go...
I'm doing the same thing right now on another thread. I had my trickle charger charging the 12v battery at 2 amps while trying to run 4 dc6's and...
Thanks. I can't get the wires to connect. I'll tape them. New problem. When I was being aggressive with the cells, trying to get them back in...
Ok, I got it together. I put the end cap on and left one module out and then slowly worked the module down in there. It took a while, but they're...
Also, there are 3 pairs of wires underneath the battery. They connect to #1, 15, and 28. They attach with a plastic clip and appear to be sensors...
Hello all, I've been out of town and just now getting back to this. I've got plenty of new screws and I'm ready to reassemble the pack and try...
More bad news, but I'm not giving up unless I get smacked across the head with 220v DC! After removing and reinstalling the modules a few times,...
Ok, it looks like some modules have been ruined. Some have swelled slightly, just enough to prevent me from getting the case back together. I will...
Jeff, Will it be allright to redo the first 4? Or should they be ok and just go on to the next? What about the 2nd group of 4 that I stopped on...
