Separate names with a comma.
OK ...so I totaled up the combined weight of all the materials and equipment used in the build and it comes to 175 lbs. More than I would have...
Yea....I may have been a little pre mature on the whole "Covid is on it's way out" statement in post #8 MY BAD
[ATTACH] [ATTACH]Here's the back side of the pods ready to be reinstalled for the final time. Speaker wires have all been sound treated with foam...
[ATTACH] [ATTACH]Here's the Very, absolute final color for the pods. It's Rustoleum Dark Charcoal in a Satin finish. I think it goes well with the...
Turns out that Rustoleum makes a satin finish in Dark Charcoal which is a good thing because the semi-Gloss was still a bit to shiny for my taste....
[ATTACH]I decided to tint the two small "Cubby" windows with 5% Tint so you won't see the Speaker pods from the outside of these windows. I wasn't...
[ATTACH]Here is the final color. It's Rustoleum gloss dark Charcoal over Rustoleum Hammered finish to give it some texture. I'm going to put it in...
[ATTACH] [ATTACH]Here are the pods after a final layer of glazing puddy and a sanding with 600 grit sandpaper. Then 2 layers of sandable filler...
[ATTACH] [ATTACH]First coat of Glazing Puddy spread and sanded with 440 grit sandpaper. One more coat of Glaze should do it.
[ATTACH] [ATTACH] [ATTACH]Pods after second coat of filler and a sanding with 220 grit sandpaper. Glazing puddy to fill small holes and scratches...
Build in progress
Sorry about that... Rookie Mistake
[ATTACH] [ATTACH] [ATTACH] [ATTACH] WHILE I'M WORKING ON THE A-PILLAR SPEAKER PODS I'M ALSO RUNNING ALL THE NEW HOME RUN SPEAKER WIRING FOR THE...
FIRST COAT OF FILLER. ONE SIDE SANDED THE OTHER NOT. I'M STILL DECIDING IF I WANT TO PAINT OR WRAP THESE PODS.
[ATTACH] [ATTACH] [ATTACH]A VIEW OF THE PODS FROM THE OUTSIDE THRU THE WINDSHIELD. THE IDEA WAS TO KEEP THE SPEAKERS AS TIGHT AS POSSIBLE TO THE...
[ATTACH] [ATTACH]TEST FITTING THE PODS BEFORE APLYING ANY FILLER
[ATTACH] [ATTACH] [ATTACH] [ATTACH]SPEAKER PODS AFTER A QUICK SANDING TO PREPARE FOR FILLER.
[ATTACH] [ATTACH]Here are the pods with the first layer of fiberglass mat applied before trimming and sanding down the rough edges. The holes are...
[ATTACH] [ATTACH]Here are the pods after they have been covered with the speaker grill cloth using CA glue and Activator. Use gloves when using...
[ATTACH] [ATTACH] [ATTACH]Test fitting the pods in the vehicle before attaching grill cloth so I could make any adjustments if needed. These...
