Separate names with a comma.
[ATTACH] [ATTACH]Temporary wood dowels hot glued in place to provide some rigidity while stretching speaker grill cloth into place
[ATTACH]Left and right pillars with the access holes cut out and pre fab pods hot glued in place[ATTACH]
[ATTACH]Left and right pillars with the access holes cut out. Be certain to rough up the surface of the A pillars with sandpaper to help with...
[ATTACH] [ATTACH]So here are the aiming points for the tweeters in the A-Pillar pods. I have them centered on the two front headrests. An...
[ATTACH] [ATTACH]So here are the Focal 3.5" Midrange speakers that I'm using in The Pods to replace the 4" focal midrange speakers in the dash....
[ATTACH] [ATTACH]OK so here are the materials for the A-Pillar speaker pods. All total not including the 3.5" Focal Mids its about $125.00 in...
OK ...I decided to bite the Bullet and build the A-pillar speaker pods for the front Tweeters and Mids. I'm looking to save some work by starting...
So far I have about $ 4,500 into the system plus Tuning which will be done soon
So far so good. It never really runs at 900 watts . That would be at full volume with a test CD playing. Of course music goes up and down and the...
It's just the angle of the camera. The tweeters are actually pointed right at the drivers face
[ATTACH] [ATTACH] Finally got around to installing the bass control for the sub amp. Decided on right behind the directional on the small...
I also removed the 30 degree Focal tweeter pods and installed the tweeters directly into the sail panels. A completely flush mount wasn't possible...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]So while I'm waiting for the new Helix amp to arrive I re -covered the front mid range...
THE HELIX V EIGHT MK2 AMP/DSP IS RATED AT 75WATTS x 8 CHANNELS FOR 600 WATTS TOTAL PLUS THE 300 WATT AMP FOR THE SUB FOR A TOTAL OF 900 WATTS. OF...
So after living with the system for a month I have to make some changes. Seems that the Audiocontrol DM-608 is not the best DSP to use to...
So that's my upgrade project for the Gen 3 Prius model 3 with the JVC and navigation and keeping the stock head unit. When I get the system tuned...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]The wiring going into the DM-608 with the yellow connectors are the wires coming from the factory JVC...
[ATTACH]Here's are a few close up views showing some of the wiring and the rear door speaker crossovers. The blue 12 ga speaker wire at the...
