Separate names with a comma.
I couldn't see the lin there. It's on the door. Here's a photo:
It's the hinge pin rather than the clip. It actually looks like a hinge pin from a normal door hinge, except it is narrow (maybe 3 mm diameter)...
The fuel door on my gen 2 prius has a broken spring. It's not the clip...its the spring. It has been very stiff.. Anyone know what parts I should...
I couldn't get to the lower sway bar Link....but I was using a Dremel. Switched to a sawzall metal Blade and all is good . Everything gets so...
So I've done this before...and had trouble...but I'm currently stuck with the driver side lower sway bar ....front. Ive resorted to cutting it off...
Well, I need new shocks....and just changed a ball joint and a tie rod.
Do I have to get an alignment (gen ii) at a dealer? Canadian Tire is telling me they won't touch the Prius because of a service bulletin.
Saw this ad on Kijiji in Toronto. Looks like a gen ii Prius, but how is there a charging outlet in the rear bumper? [ATTACH] [ATTACH] [ATTACH]
I found one from a 2005 at a pick your own place. Got the linkage, motor and the connector between the linkage and motor (this part doesn't come...
The plastic bushing closest to the wiper motor.
At least the fasteners under the cowl aren't hard to get off when they are cold
Hmmm I think you are right. I wonder if snow has something to do with the failure. Although I noticed a lot of ice below the cowl...possibly due...
This is in Canada. Dealer is over 500$...new Cardone is like 400...scrap is at least 100$....pull your own is cheaper, but far from here and often...
I think I could find one at a scrap yard, but they are more than half the price of a new one. Odd that new ones are so hard to find though.
Any way of repairing or replacing the bushing on the wiper linkage? I think I have to replace the whole thing....it's hard to find and expensive....
Any difference between gen ii and Gen III cat thefts? .
Thanks. I guess it depends on how long I think my 08 will last. Only real complaint is the suspension and the rust that's building up.... Posted...
Just saw a 2014 pip for sale....seems reasonable. I have a 2008 Gen ii that is doing well. Any one have an opinion on the move from a Gen ii to...
True...I probably should replace the whole thing. Now that I know how to get to it though, I probably won't. I did find the springs ...biggest...
My hood cable broke. I managed to open the hood (long nose pliers from right side helped get the latch open). Now I see one of the larger springs...
