Separate names with a comma.
I'm not so sure the 4 resistor version won't transmit because I seem to remember seeing references to send commands in the source code... We'll...
Additions to the BOM: I've not included anything about mounting. That's left as an exercise for the reader ;-) My current thought is to go with...
OK - here's the "simplified" version. [ATTACH] It may not look much simpler - but... I'm shifting more of the smarts onto the Tablet rather...
Actually, I think I'm reverting to something similar to your original idea - using a IOIO as well as keeping the MFD. My first thought (as per...
I'm considering a slightly different architecture for this. See attached diagram. The idea is to have a "headless" webserver and then have the...
A little bit of progress... I have the battery ECU hooked up on the bench*, powered up and spitting out CAN messages that are being read by the...
I had Enginer re-configure the packs as 40Ah / 48V instead of 80Ah/24V.
I'm not sure how we'd figure out how to make Gateway ECU send from AVC-LAN to BEAN. In that document I link above there is a G/W address. So,...
Check this out: http://elinux.org/images/e/ed/Avc-lan.pdf
Looks like adding a new active node on BEAN (i.e. one that transmits) would be quite difficult because of the way it deals with data collision...
If I were you I'd just go with the DuinoMite Mega - mouser and digikey have 'em for about $40. Yes, we'd have to convert the software for the AVC...
Excellent!
Dollars to donuts the transmission of everything else is clear. When you're building a gazillion cars you don't want to have add...
Actually I don't think it will be too hard because it's likely that all the commands are pretty much discretely controlled by buttons. Press a...
Other cheapo logic analyzer choices: USB Oscilloscope & Logic Analyzer & Signal Generator | eBay ZeptoProg II AVR ISP Programmer and Multitool...
OK - more googling... AVC-LAN - eLinux.org - seems like it's a differential signal much like CAN (and they talk about using CAN transceivers as...
Googling IBus turned up this on AVRFreaks: "I've been trying to read and write to the BMW ibus, which is Real Similar to LIN, which is Real...
Hardware I'm currently using is a dev board from Atmel: Atmel Store / Atmel AT32UC3C-EK And a DuinoMite Mega (this things a bargain!) My...
Well I got an SBC for $75ish - interfacing to an LCD touchscreen will be a challenge but should be "doable". I'm not too bothered about making it...
Hi contraption, I'm concentrating on making my Prius a plug-in first before I move on to this project. So, I've not made any progress. Your...
