Separate names with a comma.
Hi JLo, Nope, you're not going to be able to use USB in this way. Those USB/RS232 converters are client devices designed to give USB hosts...
I think he's going to release a version for all three platforms: Color Maximite, UBW32 and Duinomite Mega. In fact, AFAIK, the only version that's...
Kokam have lipo cells that pass the puncture test. Others may have too. DROID RAZR ? 2
There are automotive grade LiPo's from at least one reputable supplier (Kokam I believe) - there may be others. Any device storing 20kWh of...
After thinking about this a little more - and assuming you still want to program in BASIC - plan B won't work very well for you. None of the CAN...
58&59 correlate with the PIC's datasheet for CAN channel 1, 80&81 don't appear to match the datasheet for this channel nor for channel 2 (which,...
I don't know for sure - but this certainly sounds about right for LiFePO4. If you went with LiPo I bet you could get over 20kWh...
Current Status of the BOM: Car: 2005 Prius Gen 2 - high mileage with failing pack - $5,000 Pack: 72SP2 RFE Cells (~9kWh pack) - $4,500 Charger:...
:oops: DOH!!! The solution has been staring me in the face. The perfect two channel solution will be a UBW32. The PIC32 already has an...
Actually (per your post on The Back Shed) you'd be better off adding the circuitry yourself on the prototyping area. The Sparkfun and Seeed...
There's also this CAN shield if you go that route: CAN-BUS Shield [SLD08201P] - $23.50 : Seeed Studio Bazaar, Boost ideas, extend the reach
Nope - I'm committed to pEEf's approach. I think it's better.
I should be able to send a subset of the DTC's - some of the codes won't be applicable to the new system. I don't recall pEEf having any issue...
Hi I've been making progress and actually do have more time now. The new job is strictly regular hours. Yippee! Progress is nothing very...
The way you're doing it is probably the best approach. How many separate channels is your CANVIEW app using? DROID RAZR ? 2
The way I have the CAN configuration setup this won't work. I set up the receive channel to filter for replies for the specific response ID. So,...
Update 2: I got the PID request and retrieve all frames to work. Nothing to do with being on the bench - I was just sending the wrong response....
Update: I got the PID request working and can receive the primary frame (byte 0 = 0x10), but I can't get the remaining frames to transmit....
Attached is a new version of the CAN commands. CAN TX is working - I've confirmed this on my bench setup which has the Atmel logging all bus...
contraption - I just ordered one of these: Open Logic Sniffer seems like a bargain compared to the Saelae Logic. What DSO do you have? The Nano...
