Separate names with a comma.
Couple of updates: I installed the old O2 sensor from my blown motor to the new one to check if the o2 sensor is the issue before buying a new...
Most of the parts can be reused but would require tons of cleaning. I'd say 60% of the time spent on this project was on cleaning and prepping all...
I did not disable EGR, still mulling over that idea. The old EGR cooler that I had cleaned a year or so ago was almost fully plugged again when I...
Thats just how its installed, the bottom has on/off illuminated push button for the anti-glare and compass (if the mirror has compass) along with...
Still need to install the wire/plug cover. [ATTACH]
Update, new mirror is installed, no cutting, no splicing, no modifications needed. It looks great and works perfect. Anti-glare works like a charm...
^^ I bought a new timing chain tensioner and a new gasket came with the gasket set, spoke to a toyota tech and he said not to apply anything on...
She lives again with a new heart, short video of first start; car is back on the road and have already put 100 miles on the new motor. Oil change...
Finally moving forward with the new motor transplant. On the right, one of the good bolts. Middle one sheared right at the base of the head, got...
I know this is a very old thread but this issue has never, to my knowledge, been resolved. There are two light sensors in the mirror, front facing...
^^ Thanks you for the kind words @Montgomery The old motor is out, didnt have to use heat, just tons of PB blaster and a bit of persuasion using...
So past couple of weeks the weather has been completely uncooperative, if the sun came out then it was cold, if the temperature went up it was...
Now we wait for a good day to shoehorn this puppy in the car. [ATTACH] [ATTACH] [ATTACH]
Well the hard part is behind me, too tired to finish it up today, will finish up everything tomorrow. [ATTACH] [ATTACH] [ATTACH] [ATTACH]...
So far the total is $1212, this includes $200 I paid for this used motor I am rebuilding. My car is still on the road with a blown head gasket...
Picked up the bearings yesterday and threw together some of the bottom end today. [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]...
Need a bit of clarification on distance between crankshaft bearing cap and bearing itself distance on each side. First time you read this part it...
I read that in the service manual as well but luckily nothing of that sort was needed. I was able to knock out the old pins using a makeshift...
New pistons and new rings installed on the old rods. I checked the sleeve bearing diameter and it was within spec. I have been chipping away at...
What kind of issues beside CEL on the dash am I looking at if I decommission the EGR system? I.e just unplug the actuator and stop EGR system from...
