Separate names with a comma.
BJH, you need to reread post #1 of this thread. The ring is black and is around the outside of the lock cylinder. Also look at the photos in...
I'd still Recommend Avi at Hybridfix.com , even if you have to join AAA Plus level for the free tow (up to 100 miles). He may have good used...
You can also have a shop evacuate the system, charge with nitrogen and listen for the leak. If it is a major evaporator leak you'll hear it...
To adjust headlight beam (up/down) on Gen1 Prius you need a fairly long #2 Philips screwdriver, insert throught the Dime size hole. Insert in the...
Sandy, if you're in LA take it to Avi at HybridFix.com. He knows Gen1's really well.
No, it could also be the engine is seized. Try turning the crankshaft pully. If belt is off you can almost turn it by hand but if you use a...
yes gen2 belt will work to bypass AC compressor, but to test you can just remove the belt and start the engine, if noise goes away the problem is...
Removing the Evap Core in a Gen2 Prius is a royal PITA. "book time" is 6-7 hours but plan on taking at least twice as long if you've never done...
uhm Prius engines do not have a pressure plate (nor do the trannies have a torque converter) so your comment about removing pressure plate bolts...
Gen2 (2004-2009) Prius and Gen3 (2010-2015) are completely different cars. Instructions for Gen2 may not work on Gen3 and vice versa.
A genuine new Toyota battery even with 1 year warranty is a smarter buy than anything "rebuilt", no matter how long the warranty is on the rebuilt...
Astralography, instead of throwing parts at your car why don't have you have it diagnosed first? Since you have no pressure at all, there is a...
Usually the fusible link is visibly damaged if its damaged. You can check each subfuse it contains with an ohmmeter. Matt, what is the problem...
I've had bad luck with Pioneer radios and RP4.2-TY11 so test everything before you put it all back in the dash. For parking brake wire on...
If you replace the factory 57031 "touchscreen" radio with an aftermarket radio what do you lose aside from OEM bluetooth integration and car...
Mainly the speaker wires are no longer connected to the factory radio. Why would you want to use the factory radio? Just install an aftermarket...
Yes primuspaul, with the harness adaptor you install any single DIN height radio in the CD pocket of the Gen1 Prius. The factory speakers will...
Some of the links in posts above are broken, but here's a repost of what the wiring harness should look like; (the links in above posts may...
The box for the interface says "RadioPro 4" but the official part number is RP4.2-TY11. Some may just call it RadioPro4.
Recently installed an Alpine CDE-143BT into a 2005 Prius with JBL. Used the PAC Audio RP4.2-TY11 and it was reasonably plug and play. (after...
