Separate names with a comma.
The water pump was replaced when I replaced the head gasket last year (I know this doesn't eliminate it but makes me hesitant to go right to...
The noise only happens when the engine is on and at a low RPM.
This video is just turning the car fully on first thing in the morning. The ready light is on. The sound happens only when the engine is on low...
Hello all, Recently I noticed a new grinding sound when I start my 2010 Prius in the morning. I can also hear it occasionally when the engine in...
Bad news unfortunately. I drove around for around 10-20 min before I started getting the high engine temperature light. Even after stopping for a...
So I let the engine run in maintenance mode for around another 15 min and no more smoke. Looking at the coolant temperature, it seems to be pretty...
I ended up just going to the store and buying another sensor and after replacing it it looks like I'm past that code. The engine now keeps...
There was this wire that goes from the wire harness to a sensor on the coolant hose that I accidentally pinched as I was putting on the engine...
Hello, So after putting things back together after replacing the head gasket I started it in maintenance mode, but after a few seconds, the...
So I renewed my TIS subscription and found the camshaft installation guide and was able to follow it and put on the timing chain. Can someone...
I ended up getting a straight-edge and verified that there was no warpage. I have already put on the head and now I am working on the Cam Shaft...
What would you recommend wiping it down with? Sponges, paper towels and rags or can a steel wool pad be used? Any specific cleaner that might...
Got it. I have the FEL-PRO kit and I see it does have the stem seals. Do I need to do or check anything else with the head if I can avoid...
I apologize. I wasn't aware of the proper etiquette here and wanted to separate conversation topics. I didn't see any head refurb info in my...
Hello all, I was able to take off the cylinder head and pull the head gasket so now according to instructions I need to get it machined. This is...
I was able to pry it loose. It was just glued on a bit tighter. Thanks for the suggestions. It pointed me in the direction of the exhaust which...
That was one of the problems. I unscrewed one more screw there and now the back of the head assembly moves freely, but there is still something in...
I found that I did not take off the screw that was deeper down on the exhaust pipes that was shown at 17:59 of this video: [MEDIA] Now it looks...
Looks like Google Drive doesn't work for these things. Here it is uploaded on YouTube: [MEDIA]
Hello all, I am working on a DIY Head Gasket replacement for my 2010 Prius. I already got as far as taking off the head. I have unscrewed all 10...
