Separate names with a comma.
All good advice and much appreciated. I will just have to be a brave-boy and undo all my spark plugs and see how it feels second time round. If I...
Dear all, Those of you active on my recent threads may be familiar with my current woes, and I'm pretty sure the plugs have worked themselves...
I've just checked the battery at the terminals and it's sitting at 12.6V while off, at the first push of Power it drops to 12.5, then 12.3, and...
Ok that is an answer I like. But I'll replace the battery anyway. It'll kill my HV battery/accumulator eventually. I get your point about the...
Dear all, again I'm contemplating all sources of my issue, I noticed my battery sits at 11.3V when read from the Diagnostics page from the...
Mine sits at around 15% when reading the sensor from an OBD2 scanner. I have no idea if that's normal. So take it with a pinch of salt.
So no misfire fault codes produced, but could it be something else causing a misfire-like symptom that wouldn't produce a feeback. I assume the...
Hi again, Just quickly, and I know it's been answered before, but it's 2024 now, so what's the latest and most accessible way for the enthusiast...
That was an interesting article indeed. Maybe I've got an actual misfire (no codes ever though). I will say though, there are times when it will...
When you say 'tips of the piston', I'm guessing based on knowing very little about piston design, the 'middle part' between where the vavles would...
The mileage is 108,000 miles. I've had that plastic thing off when I took the undertray off last weekend and there was nothing to be seen there....
I wouldn't think the gearbox is something you test in isolation since the engine is an input that either drives the car with the help of MG2, or...
Sorry for being long to reply, and thanks for the replies so far... So I came to that initial conclusion because my mechanic said when it went in...
Dear all, My gearbox is ill and I'm seriously considering swapping it out for a second hand one for £200 and doing the work myself. I'm in the UK...
Thank you both. That kind of information is exactly what I wanted. Thanks for the input, much appreciated.
I'm going to clean my EGR cooler soon and from what I've seen it looks pretty straightforward. My only question really is when I pinch the 4...
From what I understand, there are a lot of Chinese clones of the "original" ELM327 chipset because they initial version of the firmware was easily...
I think the Torque Pro would use whatever protocol it find complete first, which would be the CAN in our case, I don't know if it would use the...
Hi all, So to make sure I get all my PID's being read by Torque Pro I'm building my own ELM327 module based on the ELM327 v2.3 which is on it's...
Well I've bought one now, Thanks so much for the insightful help so far. Really glad to be here. I've ordered a new OBD2 reader as I lost mine,...
