Separate names with a comma.
Here's a document I created. I hope it helps
It's nice that someone makes an adapter cable for 12 volt cameras. The problem is, now you have to run the wires all the way to the front and...
It might be that it loads the phone list and music list. I use an ipad for music and a cheap bloothtooth tracphone and I don't have a problem....
Hey guys! You shouldn't be texting while driving :-)
When I bought my 2012 Prius 2 last year I had choice between it and a 2011 Prius 3. The prius 3 had a nav screen and a 6 cd changer. Because the...
Don't use Bluetooth, use the USB cable instead. Then the iPhone or iPad/iPod will display when you select source.
There is a way to use the 12 volt camera wired to the backup light and a single 43 ohm resistor could be used as a dummy 6v camera. The resistor...
If you search the gen3 group will find 12 pages of chat where others including myself installed a backup camera in the non-nav head unit. I have...
On my second try I connected my iPod 5 to the USB connection inside the center glove box. Then in the audio screen I selected "source". When you...
There's a menu under setup/general called "capture image" that you can turn on. I assume it's for the album image but when turned on, it doesn't...
What's inside? How about the audio/nav system? I assume it has a backup camera and the entune system? Any other electronins like the blind spot...
I think it's the phone I connect my ipad and my cheap, $30 virgin mobile phone with no problems. They disconnect when the car is off and the...
I'm looking for a dynamat installer in the Chicago area. Does anyone know where I can find one in the southwest suburbs?
Hey Guys. There's an equal number of chats on this Forum. BACK UP CAMERA FOR 2012 PRIUS two TOUCH SCREEN- NON NAV We already figured out how...
It's on page 4 but there was an early post where some said that when you press and hold the power button and at the same time put the car...
I also found this diagram
I think the camera draws about 150ma. 33 ohms would drop the voltage too much. At 10 ohms I was dividing the current evenly between the camera...
That's me! I designed the ICM-1024 over 20 years ago and I still sell it. The simple regulator should work but I'm not sure about the...
I saw the circuit and I also came to the conclusion that it wouldn't work. The diodes were connected backwords and when a diode is connected in...
Here's a simple 3.3 volt regulator circuit
