Separate names with a comma.
A major problem with that strategy, although Curt and others do offer such "direct" kits, is the wire gauge of the Prius lights is very small...
I generally agree on all points, excerpted above. However, I also own a brand-new 2014 c One and a slightly-used 2012 LB Two, and my reason for...
No thanks! The exterior (front and rear) is too radical for me, and the interior is not an improvement. I'll keep my 2001, 2012 LB and 2014 c,...
Yes, I would go with an early Gen2 over a kludged Gen1 any day of the week. There are perhaps three different variations of the 1NZ-FXE (Gen1,...
The possible requirement for the 1NZ-FXE head was implicit in the requirement for the intake camshaft which supports the Atkinson-Miller Cycle...
Unfortunately, CC is a computer algorithm which is an integral part of the ECU. And, as such, the computer-based CC algorithm is subject to...
Correct ... the ECU already has the software in it to perform the several algorithms which are associated with the cruise control function....
Possibly possible, should your hybrid 1NZ-FXE block and damper be usable, otherwise not. Consider that a 1NZ-FE block would normally be designed...
And, Gen I is functionally identical to Gen II, except that the Gen I ring gear is overly complicated and is supported on numerous needle...
10mm is nearly 4/10-ths of an inch ... a significant amount.
Not the original poster, but I am reporting a similar experience. 250,000 miles on the odometer. The HV battery was replaced at 150,000 miles....
$135 to $150 is about average for an uncut keyless key from a Toyota dealer, and most automotive locksmiths will not fiddle with supposedly blank...
Cruise control was actually in the ECU's software from the beginning, but it was not a gen-u-wine accessory (or, should that be "gen-u-one...
This problem has been identified in common with almost all Toyotas which employ so-called "split wafer" cylinders, usually in the last (innermost)...
Yes, you do indeed need a Master (black) key to reprogram the "immobilizer" to accept new keys with new "immobilizer" codes. But, if all you have...
The valet key is gray in color on the "bow" and has deeper cuts in the "blade" in what would be positions 11 and 12 (the Prius mechanical keys are...
It works well in suburban and rural California, but certainly much less so in urban California.
I agree, particularly after I acquired a new-to-me 2001 Prius which, thankfully, had cruise installed. On a 2001-2003, and perhaps on others, the...
There are two different ratios employed in the MSRD, one slightly greater than 2.5:1. and one slightly less than 2.5:1. It is not a surprise...
The keyway is the same across all Priuses which have mechanical keys from 2001 to the present. All Prius keys are of the "10 position" type...
