Separate names with a comma.
One of the Lock actuators isn't working there switches inside or the motor froze up Try Locking the door and see if they all lock Most likely...
I did worked the same. O2 sensor little tight fit. Thought it would be louder but it wasn't .
After market $120 on eBay .
Add metal washer have to remove the rubber one to get the metal one one has to seat flat on the fuel injectors .
You have a air leak at the seals I had to a washer to the top of the fuel injector to push them in. Tried OEM seal and injectors still same but...
Have you touched the fuel injectors? .
If you did and the injector are loose add a washer to the top you will have to remove the rubber seal off the injector to get the washer over....
Did you do the Injectors before the noise .
Has to be a wire touching the frame .5 still zero. Have someone watch it and move wires .
Test the fuse jack to ground if it shorted unplug plugs intel it gone what left mostly shorted .
30amp fuse I look for a short wire .
And the yellow to get memory you need to add a 12v in Parallel with a charger and the battery you wanna charge to get enough current to clean the...
Open battery charge 2 battery at a time14v have to remove the orange bar one side. Or make jumpers and charge one side at a time it will balance...
And the black box next to the battery it is the back up brake power .
I have 3 Prius now kids had 7 in total only 3 burn oil a lot of oil all around the same miles so it not normal my thinking is is you change the...
I used berryman’s b12 try to clean the ring drains on my piston. Let soak over night .5 of a quart less brurn a way. But still burn 1 quart...
Did you do piston soak too? .
Bottom picture on right mine was slices glue together almost round .
Opps wrong side .
Allied Express tan matches perfectly[ATTACH] .
