Separate names with a comma.
yep, same here, mask up to go outside....
And we'll all glow a little more every day...... A gas plant blows up and hundreds are injured or killed compared to the millions for 1 nuclear...
probably late to the show but if someone else see's the thread, preamp inside map lamp console and the lamp pcb is different, has a jack for the...
ITBland has as chart to move the 6 wires on M13 into the newer MFD configuration. thread: Will 86110-47230 work instead of 86110-47081 in 2005...
They had two units on the lot. First one, I think was an 06, no hole. Second was a taxi, wanted to look at the MFD and Map Light Assembly but...
GOOD NEWS EVERYONE.... Found a Prius G2, with a camera! Attached is the photo I used for the template. I made model with some HVAC sheet...
Done, IJ3-22 is completely open and orange jumper run from red wire to a solder joint on a salvage M13 pink wire. Confirmation of switched battery...
I have no access to that car anymore, about 500km east of me now. Hoping the wrecker here still has a later prius 06-09 on the lot. Maybe it has...
No Nav unit, camera is the mate to the MFD from the donor car. Assuming the camera is good, should work...
It doesn't get to J36 cause there are no wires in 5E2 or 5N14 and no male pin in the IJ3-22 jack but the female pin is in place in the plug of...
Found J10, taped onto the harness. No spare pins, would have to tap into one of them. Went back to J36, only 1 black wire in the first position....
Ok, J10 looks promising, will give it a go.......
Tyco is the maker, these are AMP connectors. They are TE Connectivity now, same disease as HP management. Don't know who they are so may as well...
Nice try anyway, never be able to get the parallax corrected. Hoping the wrecker here still has a unit on the lot, will find out tomorrow...
I'll have a look, thanks
No Nav, it the same screen as the 4 button type you posted. Bluetooth seems to work, does pair with the phone, but needs a mic. Should be easy...
There is a physical difference in the 2005 M13 and 2009 M13 connectors, photo attached. The M14 connector pins works the same on the on the 2009....
The release is the small holes near the edge of the connector. Check that locking bar is out (pain in the b design). I used a very small...
Any luck? JC91006 is too skeptical... I just installed (today) the 86110-47210 MFD into my base 05, replacing the original "47080 MFD"....
Today I put in a 86110-47210 MFD in my 05 prius. M13 connector must be rewired. Basically pop out the required pins and pop them back into the...
