Separate names with a comma.
Any coolant loss? Did you remove the intake manifold and make sure all the ports are 100% cleaned out. The small ports where the egr feeds into...
It is possible for an ac system to leak (slow leak), rock hitting condensor in front or not running ac will dry out the green rubber "o" rings in...
You can use the two bolts that hold the ac unit to remove the pulley. Use a pulley removal tool or bearing removal tool. I would remove all the...
I have 310k on my original water pump, inverter pump, hv battery and transmission is still strong, Rotors had more rust than wear and had to be...
Oil will burn from pcv, rings and valve seals.
yes
For the full oil change. My ridgeline's oil pan is aluminum. I am not sure is valvoline high mileage motor oil has a modifier like atp re-seal. I...
I had a main seal leak on my ridgeline and it fixed the leak. 55k miles and counting, I saved 1500$ from the honda dealer pulling my subframe and...
This stuff works really well at swelling/sealing leaks with rubber main seals and valve seals. It's worth a shot. Worn valve guides could create...
If you are running ceramic brake pads, they will wear out rotors faster. I myself prefer semi-metallic pads, They stop the car faster without warm...
[ATTACH] This is what blew your head gasket. Did you experience hard knock at start up? This oil, water, fuel is what was sucked into your...
I do not remember where the hell I got the socket for my head bolts, advanced auto, pep boys? I have a drawer full of one time job specific tools....
I aligned it per manual as shown, you can also see it in the pics from my rebuild. The timing chain was a little vague due to the multiple hash...
I may do a leak down test on the 2010 soon when the weather and day light saving come into effect. It was 60 one day and snowing the next. Weather...
Cylinder #1 in most cases is closest to the pulley. As look at the motor standing in front of the bumper, far left is cylinder #1 by the pulley.
I would do a leak down test if you have the time. I have read a lot on bobistheoilguy and have seen posts where people have shown some toyota...
Every head gasket looks to pop cylinder number 1. Car was definitely burning oil from the looks of the pistons.
All the bearings were in spec and torque specs are all in the manual I have provided for download below, 180 medium hone stone using a 30-40...
You have excessive blow-by. This is caused by worn out rings, cracked ring lands, cracked piston or worn cylinder walls. The excessive oil...
I have yet to see anything negative about this mod with over 50k miles between both our prii having used them. I could have easily filled a gallon...
