Separate names with a comma.
I guess it all depends on what you're trying to achieve. I'm just trying to highlight for readers coming along later that using that 5-minute...
Yes, I understood that's what you meant. There is no way you can charge past ~ 220 V by waiting only five minutes. If you look at the graph...
It's more like 4 to 6 hours, not 5 minutes.
I don't know if they have improved, but Hybrid Battery 911 had varied and mixed reviews (as in not great reviews), once upon a time. By shopping...
I'm undecided if it is a typo or not. In any case, from my reading, P0A0D would be put out if an attempt to start the car with the service plug...
That will do it. Glad you got it all cleaned and snugged up.
That's no problem, sometimes life happens! I can't offer any advice/knowledge about either discharger as I use light bulbs. I don't think they...
Blink-code 59 (C1259) is stored if the power switch is ON (READY) while the HV battery service plug is disconnected.
That's not very feasible, especially for a first-timer. Some parts from the old battery need to be reused on the new battery. To ensure you...
So why are you posting in a Gen 2 thread, then? If you post in a Gen 3 thread, you'll get better advice from people with the same generation as...
Not sure why you removed the safety interlock but P0A0D means the safety interlock switch is not locked in (step 3 below). [ATTACH]
It is probably better to go straight to their website by clicking here.
This tells you exactly nothing about the state of your HV battery. The only thing it tells you is that your inverter DC/DC converter is putting...
I wouldn't think so. Yup. I don't think there is a lot of merit to doing that. That sounds like a good deal. The difference would be your...
Absolutely.
No, don't do this, you'll just p155 people off. Accelerate at 14 - 12 L/100 km (or more as required) get up to speed relatively quickly and then...
IDLER PULLEY ASSY part number 16630-21020.
The CC installed is not good enough. Presume it is not an OEM CC.
The problem with using the capacity cutoff feature is you never top-balance the module. After you've achieved the capacity cutoff, you need to...
It should be roughly the same voltage as you measure at the battery so if your battery is also 'less than 12 V' then that confirms power to the...
