Separate names with a comma.
His country is the USA so not sure why you've phrased it that way.
The OP location is IL.
Yes, it is right but you can think what you like, I don't care. Each module has a nominal voltage of 7.2 V times 28 modules equals 201.6 V. Yet...
That part is about US$41 (plus shipping) on amayama.com
Search for threads by ChapmanF where he mentions Tactrix Openport 2.0.
Just because it is fully discharged and 5 years old doesn't mean it needs to be replaced. I'd try fully charging it and then testing it first...
No, we are a 201.7 V (nominal) voltage system. We aim for 210 V as a minimum to equate to 40% SoC. It is below the 40% SoC minimum. You need to...
If what Tom suggested doesn't pan out, I'd try and get one OEM wheel (that matches the other three) from a wrecker's/dismantler's yard. Shouldn't...
The P0117 indicates a problem with the signal from the engine coolant temperature (ECT) sensor problem; specifically, the signal is unusually low...
I presume you mean the capacitor. If you really mean you replaced a resistor, you might need to revisit. You don't need it to start, just get to...
... usually at the most inconvenient time. For the sake of getting another six months of use, I'd probably bite the bullet and get your tyres...
You might be able to use a trolley jack on the rear jack point to lift the car up enough the get the tire off, then put a jack stand on the front...
Is the strut an OEM one? My thought is that the strut does not conform correctly to the OEM specifications.
I think you're on the right track there. The symptoms you list don't really sound like the failed capacitor that normally is the problem with the...
Where did that connector go in the Prius where you tested the newly acquired MFD?
I'm just wondering how you've come to this conclusion since it is not my experience. Is the Gen 1 more fragile electrically speaking?
What exactly are you calling the sensor? I'm not aware of any sensor on the ICWP.
Yes, just where metal meets metal. No, no idea. If it is clean and smooth, I'd just ignore it. If it was a surface oxidation stain, you could...
I would be surprised if the same charger worked on both chemistries. Furthermore, You should not be doing any battery work on a new battery (of...
Light machine oil. I wouldn't spray anything, just 1 drop one each end.
