Separate names with a comma.
Just used it in a 2018 Camry 2.5, the cap called for 0w-16.
The proper OE o-rings will not twist. Maybe undersized aftermarket ones will. The main concern is tearing upon install.
I used silicone brake caliper grease.
It is a sealed assembly, so no.
All Toyota’s use the same thread size and pitch.
With a check engine light on, he cannot pass emissions inspection.
You can use a Drewtech MongoosePro cable or a Cardaq Plus 3 to link the pc to the vehicle. You also need a clean, stable power supply to maintain...
I have a spare Fumoto if anyone wants it. It was in use on my car for one oil change but I took it off. Part #F103SX.
So there is no place for the oil level sensor on the Gen4 engine? We should have a sticky thread on the differences between the two engines. If...
I suggest a compression test and a leakdown test. I don't think your compression test was done properly. 65-70 psi is very low and would cause...
Toyota Prius Hybrid 1.8L 2ZRFXE New Short Block Genuine OE OEM 11400-37140 | eBay $1979 sounds like a smoking deal to me. Plus it was assembled...
A "short block" includes the crank, bearings, pistons and rings. And it is fully assembled. You simply provide the oil pump, oil pan(s), cylinder...
I would avoid that stuff like the plague. But since you are dropping in a replacement engine anyway, you may be able to get away with using...
If this was my car or one of my customers’ cars, I would still recommend going with a new Gen 3 short block from Toyota ($2k) instead of a Gen4...
They come with a warranty.
Plus the cost of the timing chain and guides is very very expensive compared to most engines.
It doesn’t make sense to spend money on the EGR at this point. If the engine does not consume oil and can be salvaged, find someone to replace the...
Have you tried cleaning the EGR ports within the intake manifold? What about the EGR cooler?
Some techs have "claimed" that the updated software will reduce/prevent the knocking but I am doubtful. Mine was updated though. And no, the...
Yes. The labor to remove and reinstall the spoiler is minimal. There is paint time and repair time (for prep). Paint and body labor rates are...
