Separate names with a comma.
My check engine light came on today. Drove the car to Auto Zone, they said it was the O2 sensor. I'll most likely replace both sensors, my...
The speed sensor bolts arrived today. I installed them, cleared the ABS VSC lights and all is good. My recommendation to anyone attempting a wheel...
Here's how I clean the throttle body. I remove the air filter box, Turn the throttle knob, and place an extension in to hold it open. I then spray...
Patrick, I didn't use a torque wrench when installing this set of plugs, but they were not loose when I removed them. The plug in the picture,...
The main reason that I change the oil so often is because it seems to get dirty quickly.
I put 40K miles on this car last year. I did take a trip to CA, I had the oil changed at a dealership in Hanford. I did have to add oil on the...
It's hard to gauge my oil consumption because I change my oil twice a month. I never add oil in between changes. I use Toyota OEM filters and...
I just replaced my spark plugs in my 2006 Prius with 170K miles. It's been a little over 40K miles since they were last replaced. Compared to the...
Patrick, LOL! I really want to, I just don't have the funds or time to do so. Maybe later this summer if I still have this car. I just bought a...
FYI: I followed Paul's advice on this thread to reset the ABS and VSC lights. How do you reset ABS light & yellow ((!)) ? | PriusChat
I replaced both knuckles today. The job went fairly smooth. The Right Hand Speed Sensor bolt broke when I was loosening it, so I had to...
Fully assembled and ready to go. I couldn't get the bearing dust covers on to save my life. So I took the knuckles to a local auto shop and they...
Here's what $1,065 in OEM Prius parts looks like. I placed 4 separate orders with Metro Toyota. Ordering all the parts at one time would have...
The Right Hand Knuckle is fine with no issues, it's the Left one I am worried about. I figured it would be best just to purchase two new knuckles...
I received the knuckle assemblies purchased on eBay. They were as described. However, I couldn't get the hubs / bearings out so I took them to an...
Mine does this every so often. I typically turn off the HVAC and let my foot off the brake, roll forward slightly, reapply brake and it goes away....
I purchased ones from the West Coast. I'm hoping they aren't rusted. But if the hubs fail to come out when the bolts are removed, I have the...
I'm getting ready to change out both front wheel bearings on my 2006 Toyota Prius with 169K miles. I've decided to take your suggestion and...
I purchased Qty 2 Gold Plugs on 2/1/15 and have yet to receive product. I've reached out to the company several times with no response. Seems like...
How did you install the new dust shield? Place a wood block over top and gentle tap with a rubber mallet?
