Separate names with a comma.
Replacing a bent rod is not difficult, and you can very well do it with the short block in place. I would also consider getting access to the...
Cleaned in place or off the vehicle? Fuel system cleaner poured in the tank can dislodge larger debris which will quickly clog the injectors'...
I do have the valves out. The reason I'm trying to clean the undersides is so I can get the suction cups of a lapping tool to attach. The carbon...
Any tips for cleaning the intake and exhaust valves of carbon deposits? Is there a coating somewhere that might be destroyed by a sodium hydroxide...
If arms = connecting rods, I replace one last time as it was very obviously bent. None of them were this time, so the original ones went back in....
The last rebuild I performed the same way on my daily driver is holding up well after nearly 3 years. No leak.
I didn't get too many pictures the first time I replaced a head gasket, but I'm taking the second one (on a different Gen 3) a bit more easy. It...
I don't think he advised against having a clean EGR cooler, and he also did not discourage DIYers from cleaning it out. For a paying customer that...
The OEM modules each have an internal manifold connecting the 6 cells and leading to a vent on top, and those vents again connect to one of two...
I've had that happen a few times. When it starts popping that false warning, there isn't anything one can do to remove the DVD. The usual control...
+1 for checking the injectors.
The ZJB program that you're likely referring to is not a recall, but more of an extended warranty. The 2010 is certainly not covered by it...
The butt dyno can't really pick up differences in cycle life, can it? ;) If a manufacturer is confident of the long term reliability of their...
The fact that something fails is not necessarily an indication of its quality. Put through enough loading cycles, any solid material will...
Dealerships techs used a rugged industrial grade laptop to run Techstream. For a while it used to be a 14.5 lb Panasonic Toughbook, but they may...
It's good to have Techstream handy, but you should be aware that neither the hardware nor the software in this bundle is "official" in any sense....
Any kind of discernible frequency of cycling of the accumulator pump is not normal, and means that one of the two components has failed. You've...
I wouldn't put much weight on that article, they seem to be mistaking distillation to be chemical process rather than a purely physical one. They...
bisco and Brian1954 were responding to this question:
Failure of the IPM inside the inverter assembly is likely (indicated by P0A94), but is also covered by the ZE3 extended warranty program (15 years...
