Separate names with a comma.
I am still not sure what your point is or if you are still confused about why I had to use the generic 526 code? I explained it several times....
I already mentioned several times in this thread that I only had a generic scanner with P0AA6 so I had to start from the 526 generic INF. LATER ON...
Now, I do would like to keep this thread alive as I think it is worth looking into inverter rebuilds and find ways in which the inverter can be...
SOLVED. here is the UPDATE. Short version: yesterday I found a good working framewire at the junkyard. this morning I hooked it up and I didn't...
well, P0AA6 526 is in fact your INF code that you can read with a generic OBD2. But regardless, I think the diagram I posted above speaks for...
That is not correct. the generic code here is 526 for P0AA6. and this is where most people start if you didn't have a fancy scanner to get a more...
Elektro could you please post a picture of any part of the manual where it points to one of this problems? I would like to know which manual you...
Chapman, if you read my previous post, also quoted above, you will find that in the beginning I just had a generic P0AA6 code with my cheap ODT2...
wow good to know, good catch!. I believe this is the 2006 manual and I have a 2008 prius. I was under the impression that all prius were the same...
1. are there any wizard electronic gurus out there that can comment on this problem with the internal metal sleeve/jacket that it is in the...
yes the picture above I attached was just a sample of the value without pressing the orange button which remain at "1" prior to testing and/or...
duplicate - deleted
the question I have for this thread: "is there anyone out there who has attempt to rebuilt a inverter or have found a way to replace any parts to...
Hi Chapman, you are absolutely right. I actually went through every step of the way from step 1 to 17 to determine that the inverter was at fault....
unfortunately I also have to replace the inverter besides the frame wire cable. but I am hoping that would fix this error code.
Pictures of inverter[ATTACH][ATTACH][ATTACH] .
I am following the inspection procedure that starts on HV-424. After a lot of testing with both standard multimeter and a megameter, I have found...
This is the default screen when you don't get any readings or sounds from the mega meter, which I think it means there is not conductivity at all....
This is the frame wire connector showing the center conector and the outer metal sleeve/jacket that Wardtp and I are referring to. this is using...
