Separate names with a comma.
I never determined the switch was bad. I tried to replace it, and it did not work. When I plugged the connector the switch white cylinder is out,...
I replaced the stop light switch. It did not work :( I noticed, that if I remove the switch, the car seems perfectly fine. The key works...
When the key battery was old, the key would gradually stop working. It would work only sometimes, from a short distance. Today both keys abruptly...
I've got a strange issue with some electrical components in my 2013 Prius C one. Today in the morning, the electronic key did not work. Key...
Thanks. It looks discontinued by Honda and Acura dealers. Still can buy online. Price varies wildly between $6 and $70 for 40cc. Does it matter...
Where can I buy a 40cc can? I think, the part number is 08885-09129. Toyota US only sells 08885-09127, which is 250cc with MSRP of $317.36 and...
Thanks. The manual says the standard refrigerant charge amount is 370g to 470g. It also says to charge an additional 100g after bubbles disappear....
I need to replace a leaking A/C Condenser on a 2013 Toyota Prius C One (damaged by rocks flying through the grill). The service manual calls for...
The radiator replacement is done. I want to share my experience. Hopefully, someone finds this useful. It took 4 days. It is not difficult, but...
Thanks a lot! This is very helpful.
I have a 2013 Prius C. My engine coolant is leaking. I lose about a quart in 1 week in expansion tank. There is always a puddle on the bottom...
I opened the sensor. Here are the photos. The sensor cover (rectangular piece inside) looks good, but I noticed a streak of rust going down from...
How do I know if the bearing is good or bad? It has no free play. The wheel did not move at all when I pushed it 3-9 and 6-12 o'clock. I can...
Thank you! I got it out. I used a long bolt and a nut of a size slightly larger than the holes in the rotor. I put the nut behind the rotor,...
Thank you! I pulled it out. But it came out together with the back plate! What do I do now? It is hanging on the brake line and parking cable. I...
Thank you! I am trying to remove the hub. I took 4 bolts out (through holes) and presoaked the seam with penetrating oil. I have a 2-jaw pulley...
I still need help with this. I cleared the codes and the problem "went away" until yesterday, when skid light started to flash again at random...
Just an update that I was able to reprogram TPMS IDs on this car with VXDIAG VCX Nano.
I wanted to check IG1, IG2, BS1 voltages while the car acts normal, but since I cleared the codes I don't have snowflakes anymore. The Data List...
You are right. Thanks. The BS (pin 15) goes to 20A ABS Main No. 1 fuse and then to the battery. Zero BS1 voltage suggests that either fuse of the...
