Separate names with a comma.
BISCO, I ordered 3 of the OpenEVSE boards from OshPark (PCB fabricator), that's their minimum order. I am building one for another forum member...
The standard J-1772 connects to the onboard CHARGER only, so unless they have a version of the onboard charger thats also an inverter, you can't...
Yes you need the 6 pin programmer, the PCB also need a jumper added between the RST pin on the 6 pin programming header and the RST line on the...
Yep, I just had (3) thruhole V4 boards fabricated by OshPark as well, and bought 3 sets of components for them from DigiKey. Also ordered AdaFruit...
A J-1772 extension cord is costly to build, $133 for the J-1772 handle with 25' of cable attached, and that eBay link for the female J-1772...
You and Toyota :) time will tell, all they have now is "simulator tests" based on mfr claims for the cells, real work will take years to discover,...
It does, but the "damage" to the cells occurs leaving them in a very high, or low SOC (State Of Charge), Toyota controls this within certain...
It comes with an 80AMP capable J-1772 to Tesla adapter. Here is a thread on the adapter, complete with pictures: J1772 Adapter for Model S The...
NO, not without modification, you will destroy the EVSE unless its modified to handle 120-240 Checkout EVSE Upgrade - Products $239.00 + $20...
Tracksyde, I built a new high power OpenEVSE, 75A capable @ 240V (18KW), obviously the PiP can't take advantage of this, but the Tesla Model S...
I sold the 30A portable OpenEVSE, and the Schnieder EV2430WS already... I could possibly put together one of the OpenEVSE V4.0 boards for you,...
Took a friend of my sister over to the Toyota dealership I buy from, the incentive in MA is $3,500 cash back from Toyota, I also negotiated nearly...
Yes, if you get an OpenEVSE with the "Advanced Power Supply" (which is the surface mount board Chris Howell has, along with his Advanced Power...
Nice job, 2 issues I see with your wiring diagram: #1 - you show a white from your panel connected to ground, technically that's supposed to be a...
Did someone summon me? :) The onboard charger built into the PiP appears to be limited to roughly 2.2KW (based on what's displayed on the...
The contactor coil runs on 240V line voltage... I found both 250VAC and 275VAC at DigiKey, they don't clamp until 429V... V250LT20AP Littelfuse...
Thanks, any idea of the value or a DigiKey part # (even better)
"sonny, I ever tell you about when I was a youngster, we had to walk up hill for 5 miles to school both ways!" rotflol :)
Jimbo, that threads pretty old, and it was a conceptual idea that could be done, but I don't think anyone has written any code to support the...
Ye, the question is: where I have the LCD displays I2C clock and data lines on 18" of unshielded wire, probably need to use a piece of shielded...
