Separate names with a comma.
If you search, you can find leather replacements. And youtube has a LOT of videos of people replacing them. You must have patience, and...
364,600 miles and still have the original plastic oil filter housing….
What do you hope to accomplish? Do you suspect water in the fuel? Restoration stuff doesn’t REALLY work. Get a quart size bottle of the Marvel...
You were able to complete the whole bleed job? What tool did you use? How long did it take? Are the brakes working correctly?
No, can't do that, don't know of any. Do a search on ebay, I'm sure they are out there. But you can look at the connectors, check the pins to see...
I don't see those post....
It was after my post…. ssoooooooo…..
Where did you get the spark plugs? From Toyota, or ebay or amazon? Or a parts store? You could switch the #4 and #3 coil packs, it would be...
I do not see anywhere on the 1st post that he checked the electrical wires, that connect to the coils, and injectors.
Have you checked the wiring?
You'll want to check the valves for leaking. Just spray wd40 into each valve and wait 10 minutes or so then carefully lift the head and see if...
I have one of those also. Used it many times! And it works great! But I've only used the correct tool for the one on the Prius. I had to use my...
That is a 1/2 inch breaker bar version, you can find the 3/8 inch breaker bar one. Check autozone..... Napa.... Or buy the little adapter....
Toyota sells them in a 10 pack. And you KNOW the are real filters. When you buy them from ebay or amazon, you are likely getting the cheap...
Nope, a phone is for talking photos. ...Intake temp is reading at ~83F, and battery started at ~12F. Looks like 30F now... ... the Temp was ~60F,...
A lot of - degrees there. That doesn't sound correct. -83 degrees? -60, -97???? I can't believe it gets that cold in Nebraska.
Hard to tell what the nut goes too, no size graph to compare it with. Same with the spring. But that looks like a spring for a seal like on the...
The auto stores, amazone, ebay, all have the proper oil filter tool. DO NOT OVER TIGHTEN the cap! You can purchase a converter kit, it's over...
See post #5. You only have to remove the rocker arm cover then you can see where the cam sprockets are. If you put the engine at tdc on the...
"IF" they timing marks are correct for both cams and crank, there is no reason to remove the head. It's sound more like a disconnected vacuum...
