Separate names with a comma.
I am pretty sure your USB ports are not being passed to the VM. You need to use the VirtualBox control panel for the Windows VM and check that...
Are you sure you're hearing that sound from the pump and not the coolant control valve, which is nearby the inverter coolant pump?
Have you enabled the USB port in the VirtualBox VM?
Just to be clear, the AISIN WQT-800 is not OEM. It is also possible that it is not a genuine AISIN WQT-800 either. Depending on where it was...
No, the dealer solution involves removing the failed printed circuit board (PCB) which is called the Combination Meter (CM), programming the new...
Funny, that's not what the repair manual says for that sub-code. Based on the malfunction signal received from the battery ECU, the system alerts...
Dr Prius has its uses but is not really a reliable (nor comprehensive) code scanner. I'd just ignore it.
Check your 12 V battery terminals are clean and tight. Check the connection from the 12 V negative terminal to the car's body is also clean and...
No, it doesn't. It means the test of the catalytic converter does not meet the threshold to pass the test. While it rarely can mean a problem...
Technically, it is called the hybrid vehicle battery, but they likely would not know what that was either.
Only the three codes above from your list should be considered for now. (Note: the first two cookie-cutter text phrases are what P1121 means in...
If you have these lights, you DO have code to read. If your code reader reports no codes, your code reader is inadequate. In all likelihood,...
Yes, this seems normal. Six to seven tenths of a volt is not much in reality and those motors actually do draw a bit when engaged. The 14.1 to...
... and of course, the correct cookie cutter text for a P1121 is Coolant Flow Control Valve Position Sensor Circuit Stuck. There are plenty of...
... and the unanswered question is, why? So you have 195's on 3 corners and a 185 on one corner?
Don't do this. If you're going to all the trouble to get to the CM, remove the failed capacitor and replace it with a new one.
Check the three connections at the 12 V battery. The two connections on the battery terminals and the other end of the negative where it connects...
Is the battery installed the correct way up? [ATTACH]
Maybe. It will depend on the quality of the VCI cable you have and whether you can access a seed code. In any case, you will need a seed code so...
I use: [ATTACH] It has become my go-to lubricant.
