Separate names with a comma.
Yes you can, but it must be halogen not HID or LED. You use both high and low-beam circuits to draw the highest current.
What ChapmanF said in post #5.
I think you're missing something. You do not need to press the unlock button on the key fob and I'm surprised it does anything useful for you,...
More than likely a loose connection at the 12 V battery or the negative connection to the car body. Check all three connections are clean and...
The way the Dr. Prius app graphs the block voltages exaggerates the difference. You only have a 0.22 V (which is not the best) difference between...
In reality, just starting it for five minutes probably does more harm than good.
What does "switching to "B" mode" do, in this scenario?
One thought I had was, what was the code when you rescanned the car? Or did you assume it was again a P1121? Incidentally, DTCs are 5 characters...
I think you will find it is the other way around, and that certainly is what happens in a Gen2. That is, the indicators flash at a faster rate...
It is likely a JDM import. It seems very popular to import JDMs into Pakistan.
This reasoning is not sound and any conclusions you draw from it are invalid. I'd be very suspicious of any 'professional' who spun such BS....
The only thing that might be "identical" is the symptoms. Unfortunately, there is a myriad of different problems that can produce these same...
This sounds quite normal for the Gen 2 from a cold start. Read the Hybrid Warm-up: 5 modes of Prius Operation. in my signature below to...
This is definitely not the right behavior. It should be more like what ChapmanF described here:
Making things up is not helpful if you expect help from people. It is better to be factual and if you can't or don't know just say nothing,...
What do you mean by a brand-new one? This is not a good idea. You need to match the capacity of the replacement module to your other 27 modules...
Even though the fuel pump and level sender are sealed in the tank, there are some diagnostic procedures you can do to confirm the failure of the...
Gen 2 OBD2 App Review. See post #37 for the cliffhanger notes.
If you haven't reinstalled all the rear trim panels, then yes, the relay clicking is really pronounced. The panels are really effective in...
On the face of it, your brake problem might seem like you're 'having the same problem' but to be certain you need to read your codes. If you have...
